Featured Glass

Reference Price:USD/㎡
Brand:Gangfa Glass
Material No.:AD98X4XF
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:GF-263012
Usage:Commercial,Residential
Country of Origin:China
Indoor & Outdoor:Indoor,Outdoor
Flammability:C
Size:2400*1830mm,2440*3660mm
Overall Thickness:12mm
Availability:Made to Order
Surface Sheen:Relief Texture Glass
Construction:Etched / Engraved,Laminated
Color:
Transparent Color Series
Brand Name:Gangfa Glass
Series Name: Art Glass
Category:Glass/Art Glass/Crystal
Customizable:Yes
Overview
Case Diagram
Case Diagram

Details

Maintenance and Precautions for Art Glass Products

I. Standard cleaning and maintenance procedures (generic)

1. Cleaning Tools (The following are allowed only)

- Ultrafine fiber soft cloth, pure cotton rags, soft sponges, wool brushes, rubber glass scraps, dustless suede cloth

- Prohibited: wire balls, hard surfaces of Kleenex, finishing knives, hard brushes, sandpaper, metal shovels, which are prone to permanent scratches and damage coatings and steel stress layers.

2. Compliance cleaners

Daily light dust: Just wipe it with water, clean and clear without residue.

Hand prints, mild oil stains: Neutral cleaning soap warm water diluted (1: 50), specialty neutral glass water.

Bathroom dirt, water stains: White vinegar: water = 1: 10. Spray and sit for 5 minutes with a soft cloth to clean. After cleaning the water, avoid the vinegar residue corroding the sealant.

Glue stains, paints, and non-dry adhesives: A small amount of waterless alcohol is wiped, and locally tested in hidden corners first. Prohibition of large-area evaporation of the coating surface.

3. The use of chemicals is prohibited.

- Strong acids: toilet cleanser, citric acid, hydrofluoric acid, rust removal agent

- Strong soda: baking soda, pipe cleaner, high concentration bleach water

- Grinded cleaning powder, tile retaining cleaner

The above agents will corrode the surface of PVB film and glass, resulting in whitening, delamination, thermal insulation failure, film yellowing and stratification

4. Correct cleaning operational points

1. Dry the cloth first to clear the dust and prevent the particles from scratching the glass.

2. Clean on cloudy days, in the early morning, and in the evening. It is prohibited to scrub in the hot sun at noon, rapid evaporation of the cleaning solution will form a stubborn water mark, and excessive temperature difference can easily cause the glass to crack with heat stress.

3. Rinse the water in one direction from top to bottom, and dry the standing water in the corners of the joints in time to avoid water seeping into the sealing layer.

4. The carved, pressed and sanded glass is gently wiped along the lines, the gaps are cleared with wool brushes, and no large amount of water is soaked.

5. Frequency of cleaning: Regular windows and doors once a month; Bathrooms, street and coastal dust environments are cleaned every month.

II. Specific maintenance rules for categories

(1) Glued safety glass (guardrails, light roofs, stairs steps)

1. Prohibit long-term strong acid, strong alkali spraying, will accelerate the middle PVB / SGP film yellowing, layered degumming;

2. The optical glass covering of the lighting roof is cleaned in time after rain, and the long-standing standing water breeds mold and seeps through the coating.

3. When cracks on the glass surface and bubbles spread, the repair was stopped immediately to prevent the entire sheet from falling under the impact.

(ii) Bathroom and shower glass

1. Rinse the water beads with a shaving machine after each bath, and do a weekly tart maintenance to avoid mineral deposits that form permanent white spots;

2. The hardware hinges and pulleys should be lubricated with silicon-based lubricant once every six months to keep the push and pull smooth.

3. The bottom film becomes black, moldy and cracked in time to replace it to prevent water seepage from corroding the bottom edge of the glass.

III. Safety precautions for daily use

1. The edges are the weak points of the steeled glass.

It is strictly forbidden to strike or knock the four corners and edges of the glass, breaking the corners will greatly increase the risk of self-explosion; Carry and install lightly, keep furniture and metal hard objects away from the side of the glass.

2. Pressure norms

- Push and close doors and windows gently, without slamming or throwing them;

- The glass barrier does not climb or carry heavy objects, and children are prohibited from heavy impact;

- Do not attach large areas of heavy advertisements and heavy objects to the glass surface, and local force is uneven and easy to crack.

3. Temperature Taboos

- High temperature glass (sunburned, freshly steamed from sauna, hot countertops) is prohibited from directly throwing cold water;

- When the temperature difference between the indoor and outdoor temperatures is large in winter, avoid a lot of indoor hot water steam putting on the cold glass.

4. Environmental Protection

- The exterior facade should be rinsed regularly in high-salt fog areas along the coast, and the salt will adhere to the corrosive glass and sealing glue for a long time.

- Renovations and construction avoid cement paste, grease, and paint splashing on the glass, and if it sticks, clean it with a warm water soft cloth, which is extremely difficult to remove after drying out.

IV. Maintenance of hardware and seals (extending the overall life of glass)

1. Door and window rails, hinges, and guardrail fixtures are cleaned of dust every six months and applied lubricant to prevent craton from causing cracking of the glass by pulling and cracking.

2. Sealing glue or tape cracks, hardens, falls off, and seeps water, replace the neutral weather resistant glue or replace the tape in time;

3. The drain hole is loosened regularly to prevent rain from pouring into the glass cavity.

V. Fault identification and treatment recommendations

1. Fine scratches on the glass surface: lightly professionally polished; Deep scratches cannot be repaired and are recommended for replacement;

2. The hollow interior is foggy and has water droplets: the seal fails, there is no repair solution, replace the hollow glass;

3. Glued glass cladding yellows, bubbles, and layers: the film is aging and presents safety hazards, and it should be replaced in a timely manner.

4. The glass appears radiated cracks and star points broken: discontinue use immediately to prevent rupture and injury to people, contact aftersales to replace it.

VI. Summary of long-term conservation

1. There are three principles of cleaning: not to use hard tools, not to use strong acids and alkalis, and not to scrub at high temperatures.

2. Use three guarding principles: guard corners, guard against sudden cold and heat, and avoid single point of heavy pressure;

3. Check three times on a regular basis: check the sealant, check the strength of the hardware, and check whether the glass has cracks and fogs.