Exterior Cladding Panel

Reference Price:USD/㎡
Brand:Trespa
Material No.:AXZ24H3H
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:NA14 Weathered Basalt
Country of Origin:Netherlands
Overall Thickness(mm):10,13,8
Surface Treatment:Matte,Matte Rock Face (without size 4270)
Size(mm):2550X1860,3050X1530,3650X1860,4270X2130
Flammability:B1
Color:
Gray Series
Brand Name:Trespa
Series Name:Meteon
Category:Wood/Wood Panel/High Pressure Laminate
Customizable:No
Overview
Case Diagram
Case DiagramMaterial Image

Details

For outdoor applications, decorative high-pressure thermosetting wood fiber boards with a thickness of 6 mm (± 1/4 inch) and above, compliant with EN 438-4:2016 and JG/T 260 standards. The board consists of natural fiber layers (paper and/or wood) impregnated with thermosetting resin and single or double face decorative surface layers with color or pattern designs. The surface layer is covered with a transparent topcoat, which is cured using Trespa's proprietary Electron Beam Curing (EBC) technology to enhance weather and UV resistance. These components are bonded together under simultaneous high temperature and high pressure to form a homogeneous closed material with higher density and an integral decorative surface. The fire performance of the product is classified as flame-retardant grade EDF.

Attention

This document is intended to provide general guidance. The usage instructions, tests, regulations, and design data mentioned by Trespa® are for reference only. We strongly recommend that clients, project managers, and architects consult qualified building professionals or engineers for advice on application and installation, design requirements, applicable codes and regulations, and testing standards. To ensure correct practices, please check local regulations and applicable design requirements.

Overview

Trespa® Meteon® features a closed, non-porous surface that makes it difficult for dirt to adhere. In addition, Trespa® Meteon® offers excellent stain resistance against many chemicals, including a wide range of non-corrosive and corrosive cleaning agents.

Although Trespa® Meteon® is virtually maintenance-free, we recommend regular cleaning once a year after installation and during normal use, or each time windows are cleaned (depending on location, application type, and panel condition).

Design Tips for Dust Prevention

The effect of dirt on decorative panels varies depending on the nature of the soiling:

Surface dust appears less dirty than dirt deposits left after rainwater runs off. Various detailing measures can help prevent dirt deposits, such as:

■ Installing water drainage features along panel edges

■ Using flat-head fasteners

■ Avoiding staggered joints wherever possible

Construction Tips

Some soiling during construction is inevitable, but the following measures can help prevent unnecessary staining:

■ Remove labels and stickers immediately after panel installation

■ Use adhesives and silicones correctly

■ Protect panel edges when painting support framing

■ Remove heavy soiling such as paint, cement, and tar immediately

Cleaning and Restoration

Trespa® panels are not only affected by dust, dirty fingerprints, and moss growth, but can also encounter serious issues like soot, graffiti, or job-site accidents. A variety of specialist cleaners for these types of stains are available from third-party suppliers. Do not use abrasive cleaners. Use a clean sponge, soft nylon brush, or soft cloth, and avoid hard brushes. Always follow the cleaning product manufacturer’s instructions strictly. Do not exceed recommended concentrations and dwell times. Effective cleaning results from the dissolution of the contaminant by the cleaning agent. Some products, such as two-component paints, polyurethane, silicone, or other polymers, are difficult to remove because they do not dissolve. Incomplete removal or use of unsuitable products can leave a permanent film on the panel. This residue can cause uneven fading of the panel surface. Consequences of improper cleaning are not covered under the Trespa® warranty. Refer to (national) safety and environmental regulations when using any cleaning agent.

Shoe Polish, Crayons, Pencils, and Chalk

Even stubborn stains like shoe polish and children’s crayons can be easily removed from the panel using organic solvents. Rinse with clean water and wipe dry to prevent watermarks. Position markings made with pencil or chalk, as well as long-standing stains, are more difficult to remove.

Paint

Use an organic solvent to remove solvent-based paints. Rinse with clean water and wipe dry to prevent watermarks. For two-component paints, remove immediately with water or organic solvent. Once this type of paint dries, it cannot be removed.

Adhesives, Sealants, and Synthetic Resins

When using adhesives, sealants, and synthetic resins, always follow the manufacturer’s instructions. This is not only essential for application but also helps determine the best cleaning method. Use organic solvents to remove solvent-based products. Then rinse with clean water and wipe dry to prevent watermarks. For two-component adhesives or synthetic resins, remove immediately with water or organic solvent. Silicone sealants should be wiped away with a clean, dry cloth, and residues removed with a silicone cleaner. Once these products dry, they cannot be removed.

Cement and Lime Residues

These stains should be removed using a concentrated acidic cleaner (such as hydrochloric acid) followed by thorough rinsing with clean water and drying.

Grease and Dirt

Long-term exposure to rain, wind, traffic, and industrial pollution can leave a medium-to-thin layer of grime on the panel surface. Depending on the degree of soiling, clean the panels with a glass cleaner every other year or more often, possibly coinciding with window cleaning. Dust, mud splashes, oil residues, and greasy fingerprints can be easily removed with a common household cleaner. Then rinse with water and wipe dry to prevent watermarks.

Algae and Moss

Algae and moss tend to grow easily in damp, shaded locations with little direct sunlight. The closed surface of Trespa® panels prevents them from penetrating deep into the material, making them easy to wipe away.

Graffiti

Trespa® Meteon® has a virtually pore-free, closed surface that prevents paint, lacquer, adhesives, ink, and other graffiti materials from sinking in. If the graffiti marks are water-soluble, they can be easily removed; otherwise use an organic solvent or a specialist graffiti remover. To prevent watermarks, rinse with water and wipe dry.

Damage

If the surface of Trespa® Meteon® is deliberately scratched, the typical solution is to apply a small amount of acrylic paint over the scratch using a fine brush. This touch-up paint is available in almost all Trespa® standard colours. Please contact your local Trespa® distributor for product availability. Accidentally broken panels should be replaced.