Engineered Wood Veneer

Reference Price:USD/㎡
Brand:SANZEMU
Material No.:B5ZTTLKA
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:W8012
Country of Origin:Guangdong Province, China
Overall Thickness(mm):3.5
Surface Treatment:Matte,Wear-resistant
Size(mm):2400*1200
Color:
Light Wood Color Series
Wood Species:Oak
Flammability:B1
Brand Name:SANZEMU
Category:Wood/Wood Veneer/Engineered Wood Veneer
Customizable:No
Overview
Case Diagram
Case Diagram

Details

What is Sanzemu

Sanzemu is a contemporary take on decorative surfaces, offering a striking collection of environmentally preferable designs that feature the innovative surface technologies from Japan. The unique finish of Sanzemu delivers a 3D embossed surface texture with advanced performance characteristics. The embossing creates a tactile surface in a range of effects, including finely textured woodgrains; smooth and dry finishes; cross-grain or rough-sawn qualities; and heavily textured woodgrains.

Application

Panel saws or table saws may be used to cut Sanzemu by Challpac. Routers for trimming edges must have a smooth, clean base plate, so that the surface will not be scratched. Use carbide-tipped bits with ball bearing guide rolls. Keep all bits sharp. Drilling into Sanzemu by Challpac may be done with standard wood bits or with router bits. For a final edge finishing use a flat smooth or fine file.

Technical Advantages

Sanzemu by Challpac offers consistency in woodgrain structure and tone across each panel, creating the ideal surface for large or small installations. The surface finish offers scratch and abrasion resistance, as well as UV, stain and water resistant; offering savings in fabrication costs and ease of installation. Navurban by Challpac, with matching ABS edging to complete the project.

Attention

Maintenance

Sanzemu by Challpac surfaces are easy to clean using a cloth dampened with warm water and detergent. If in doubt about a particular cleaner or detergent, check with its manufacturer for the suitability. We recommend you test on a small area or sample prior to applying to the surface.

Avoid the use of acetone or trichloroethylene for cleaning purposes. Use of abrasive cleaners, powders, scouring pads, steel wool, sandpaper etc. can damage the finish and make the surface susceptible to staining. Accidental spills or splatters from these harsh materials should be wiped off immediately, and the area cleaned thoroughly with a damp cloth. Examples of these materials are: Ceramic cooktop cleaners, tub and tile cleaners, chlorine bleach, oven cleaners, & harsh detergents.