Multi-Directional Press Machine

Reference Price:USD/unit
Brand:MATRIX
Material No.:CUW09ZXN
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:VERSA VS-S131
Warranty (Years):1
Customization Cycle:60 Days
Color:
Black Series
Size:154.3 x 157.2 x 199.9 cm
Brand Name:MATRIX
Series Name:VERSA-S131P
Category:Equipment/Fitness Products/Strength Equipment
Customizable:No
Overview
Case Diagram
Case Diagram

Details

1. Weight Stack: 72.6 kg / 160 lbs

2. Net Weight: 236 kg / 520 lbs

3. Dimensions: 154.3 x 157.2 x 199.9 cm

4. Seated Chest/Shoulder Press Machine (Chest/Shoulder Muscle Group)

5. Smoothly switch between exercises with a single simple adjustment

6. Front placard: muscle illustrations, exercise-specific stretches, start and finish positions, and correct movement guidance

7. Frame finish: proprietary two-layer powder coat process

8. Uniform weight stack height: 160 cm

Attention

Correct Usage: 1. Do not exceed the weight limit of the equipment. 2. If safety stops are provided, adjust them to the appropriate height. 3. Adjust the seat pad, leg pad, foot pad, range of motion adjuster, or any other adjustment devices to a comfortable starting position. Make sure all adjustments are fully locked to prevent unexpected movement or injury. 4. If a bench is provided, sit on it and adjust to the appropriate training position. 5. Do not use more weight than you can safely lift and control. 6. Perform exercises with controlled movements. 7. Return the weight plates to the starting support position.

Warranty: If you are in North America, please visit www.matrixfitness.com for warranty information, exceptions, and limitations.

Product Specifications: Maximum User Weight: 136 kg / 300 lbs. Maximum Training Weight: 107 kg / 235 lbs. Product Weight with Heavy Weight Stack: 268 kg / 590 lbs. Heavy Weight Stack: 104 kg / 230 lbs. Standard Weight Stack: 73 kg / 160 lbs. Secondary Selection Block Effective Resistance: 2.3 kg / 5 lbs. Overall Dimensions (L x W x H)*: 155 x 157 x 168 cm / 60.7 x 61.9 x 65.8 in. *A minimum clearance of 0.6 m (24 in.) must be maintained around MATRIX strength equipment for access and passage. Please note that the U.S. ADA recommends a wheelchair passage width of 0.91 m (36 in.).

Maintenance Checklist: Action Frequency: Clean pads 1 Daily. Inspect cables 2 Daily. Clean guide rods Monthly. Check for loose fasteners Monthly. Inspect main frame Every six months. Clean equipment As needed. Clean grips 1 As needed. Lubricate guide rods 3 As needed. 1 Clean pads and grips with mild soap and water or a non-ammonia cleaner. 2 Inspect cables for cracks or wear; replace immediately if damaged. If cables are loose, tighten without lifting the top plate. 3 Lubricate guide rods with a Teflon-based lubricant. Apply lubricant to a cotton cloth and wipe the guide rods up and down.