
1/1
Find
Cretivo Microcement
Reference Price:USD/㎡
Brand:MP
Material No.:D3T2YYRZ
Supplier: CONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:Coating CM-12
Country of Origin:Italy
Water Resistance:Waterproof
Finish:Glossy,Matte,Semi-gloss,Soft Gloss
Color:Brown Series
Indoor/Outdoor:Indoor,Outdoor
Mold Resistance:Mold Resistant
Flammability:Not tested yet
Brand Name:MP
Series Name:Microcement Series
Category:Paint/Decorative Paint
Customizable:Yes
Overview
Case Diagram

Details
CREATIVO Microcement achieves a seamless, continuous surface effect across spaces. / The total coating thickness is approximately 2–3 mm, with no need to modify doors or windows—effortlessly refreshing your home with a brand-new look. / Can be applied over any substrate (except wood flooring): cement mortar, stone, ceramic tiles, gypsum board, and other surfaces directly.
CREATIVO delivers excellent performance, with strong adhesion, flexibility, and resistance to compression, impact, peeling, and abrasion.
This product is a wall and floor coating system composed of resin and ultra-fine cement, suitable for various vertical walls and horizontal floors, both indoors and outdoors: such as residential and industrial building walls and floors, healthcare and hygiene facilities, food processing areas, retail stores, workshops, showrooms, bathrooms, washrooms, sinks, bathtubs, polished floors, furniture, tables, and countertops.
Attention
First Coat: CREATIVO PRIMER
Clean the substrate thoroughly and ensure it is dust-free. Use a short-nap microfiber roller to apply an even coat of CREATIVO PRIMER to enhance substrate adhesion and cure.
Second Coat: CREATIVO FONDO (Coarse Mortar) + CREATIVO MICROCEMENTO Powder
Mix 10 kg of CREATIVO FONDO with 5 kg of CREATIVO MICROCEMENTO (mixing ratio 2:1). Stir with a mechanical mixer for at least 10 minutes, then let it rest for 10 minutes before use. Apply evenly with a stainless steel trowel, ensuring full coverage.
Third Coat: CREATIVO FONDO (Coarse Mortar) + CREATIVO MICROCEMENTO Powder
Same as the second coat: Mix 10 kg CREATIVO FONDO with 5 kg CREATIVO MICROCEMENTO. Stir with a mixer for 10+ minutes and let it rest for 10 minutes. Apply with a stainless steel trowel, ensuring every area is covered.
Fourth Coat: CREATIVO FINITURA (Fine Mortar)
Tint CREATIVO FINITURA to desired color. Stir well before application. Using a specially designed ultra-thin stainless steel finishing trowel, apply an even coat, making sure all areas are covered.
Fifth Coat: CREATIVO FINITURA (Fine Mortar)
Stir CREATIVO FINITURA well before application. Using a specially designed ultra-thin stainless steel finishing trowel, apply an even coat, covering all areas. After complete drying, sand the surface manually with 120-grit or 180-grit sandpaper to correct imperfections. Vacuum all dust after sanding.
Sixth Coat: CREATIVO PRIMER
Pour CREATIVO PRIMER into a paint tray. Use a short-nap microfiber roller to load evenly, rolling off excess material. Apply a thin, even coat to the surface.
Seventh Coat: CREATIVO TOP A (Top Coat) + CREATIVO TOP B (Hardener)
Shake CREATIVO TOP B well before use. Mix CREATIVO TOP B into CREATIVO TOP A and stir thoroughly. Pour into a tray and use a CREATIVO MOHAIR ROLLER to load evenly, removing excess. Apply one careful, uniform coat, avoiding any pooling or thick spots. Do not miss corners, edges, or grooves.
Eighth Coat: CREATIVO TOP A (Top Coat) + CREATIVO TOP B (Hardener)
Same as the seventh coat: Shake CREATIVO TOP B well, mix into CREATIVO TOP A and stir thoroughly. Pour into a tray, use a CREATIVO MOHAIR ROLLER to apply evenly, removing excess. Apply a careful, uniform coat, avoiding buildup. Ensure corners, edges, and grooves are fully coated.
