
Solid Surface Freestanding Bathtub





Details
Currently offered in two styles: white bathtub with black stainless steel frame, and all-black bathtub with orange-red stainless steel frame. The surface is finished with a matte texture; color and pattern can also be customized according to design requirements.
Product Dimensions: 1800 × 900 × 600 mm
We use high-quality resin and aluminum powder, combined with independently developed and improved formulas and meticulous production processes.
The product excels in anti-yellowing, crack resistance, tensile strength, stain resistance, load-bearing performance, and fire resistance, and can maintain its quality for five to ten years or more.
Attention
In most cases, MUNK solid surface products can be repaired if accidentally damaged. However, please follow the instructions below to prevent any permanent damage:
1. Avoid contact with strong chemicals such as paint removers or aggressive cleaning agents. If contact occurs, immediately rinse the surface with clean water.
2. Do not carve or scratch directly on the solid surface product.
3. When filling with hot water, it is recommended to run cold water at the same time.
Treatment of light scratches:
First assess the severity of the scratch. Begin with the finest sandpaper. Sand along the scratch in a straight line, then change direction by 90° and continue sanding. This ensures all scratches have been removed.
Note:
If using the finest sandpaper takes too long, you may switch to a coarser grit.
To minimize dust during sanding, wet the surface before starting.
After use, rinse the sandpaper to remove residues. Dry it thoroughly and store it properly for future use.
Surface care:
1. Most dirt and stains: Use soapy water or an ammonia-based cleaner, rinse, and wipe dry.
2. Watermarks: Wipe with a damp cloth, then dry with a clean cloth.
If stains persist after the above methods, treat them following the scratch removal procedure.
