
Western Art Printed Mural










Details

Attention
Printed murals are widely used as decorative materials in indoor and outdoor advertising, decor, etc. Application scenarios include but are not limited to shopping mall facade advertising, hotel headboard feature walls, cultural exhibition displays, and more. During installation, pay attention to the following aspects:
1. Wall preparation: Ensure the wall is clean, flat, dry, and solid. If needed, apply primer or varnish to improve mural adhesion.
2. Adhesive selection: Use a suitable adhesive. Depending on the mural material, wet glue or other specific adhesives may be required. Prepare the adhesive to a thick consistency for better bonding.
3. Installation steps:
Assemble the mural panels from left to right in the labeled order, keeping the overall composition centered.
Use a soft brush to smooth out surface bubbles. Avoid hard scrapers or nylon brushes to prevent damaging the mural. Press down gently along edges to prevent lifting.
4. Cleanliness and protection: Keep hands clean during installation. Apply adhesive carefully to avoid staining the mural surface. If spills occur, immediately blot them with a sponge or towel.
5. Post-installation: After installation, close doors and windows and allow the wallpaper adhesive to dry naturally. In summer, keep the space closed for 24–36 hours; in winter, 48–60 hours.
6. Maintenance: Once installed, avoid prolonged direct sunlight and rain washing. Clean the mural surface regularly using soft cloths, and avoid hard or corrosive cleaning tools.
