Built-in Three-Sided View Wood-Burning Fireplace

Reference Price:USD/unit
Brand:Austroflamm
Material No.:DXW1CM3H
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:75x35x45 S3
Installation Service:On-site survey and installation
Country of Origin:Austria
Warranty Period(Years):6
Customization Cycle:90-120 days
Heating Area(㎡):70-130
Weight(kg):218kg
Color:
Black Series
Flame Type:Wood Burning
Indoor/Outdoor:Indoor
Content:Steel Sheet & Cast Iron
Brand Name:Austroflamm
Series Name:Built-In Wood Burning Fireplace
Category:Fireplaces & Heaters/Real-fire Fireplace
Customizable:No
Overview
Structural Diagram
Structural DiagramMaterial Image
Case Diagram
Case DiagramMaterial ImageMaterial ImageMaterial Image

Details


Attention

1. The fireplace should be scheduled for installation during the plumbing and electrical rough-in stage. 2. Provide an air intake opening at the bottom of the fireplace surround with a minimum free area of 200 cm². At the top of the surround, include a heat vent with a minimum free area of 200 cm², positioned 20–50 cm below the ceiling. 3. Use firewood cut to approximately 400 mm (16 inches) in length. 4. The fireplace relies on natural draft from the chimney height to vent smoke outdoors. The horizontal run of the chimney pipe should not exceed 3 meters. Ensure the installation location allows for convenient and efficient venting. 5. If the fireplace is placed on a wood floor, install a non-combustible hearth protection (such as steel, stone, or glass) underneath to guard against sparks that may escape when the door is opened. 6. Maintain a clearance of at least 10 cm between the back of the fireplace and the wall. The rear wall can be finished with standard materials, as the back of the fireplace does not produce excessive heat. No combustible materials are allowed within 50 cm to either side or 1 meter in front of the fireplace. 7. It is recommended to clean the ash from the firebox after every 2–3 uses. The fireplace is equipped with an ash pan at the bottom and a dedicated tool for easy removal. 8. Burning wood with high moisture content may lead to incomplete combustion, causing carbon particles to accumulate on the glass. If the glass turns black, let the fireplace cool completely, then use a slightly damp cloth or paper towel dipped in a small amount of cold wood ash to wipe the glass—this removes soot easily. Avoid using chemical cleaners, as they can damage the glass coating. 9. When the fireplace is lit, the front glass can reach temperatures of 200–300°C (400–570°F). Do not touch the glass. Heat-resistant leather gloves are included; always wear them when operating the fireplace. 10. To ignite the fire, use wax-based fire starters. Do not use liquid alcohol or other flammable liquids. 11. If children are around, exercise extra caution when the fireplace is in use to prevent accidental contact and potential burns.