
Artificial Stone Vessel Sink


Details
Engineered stone countertop basin, available in composite acrylic and pure acrylic versions.
Dimensions: 540 × 390 × 180 mm
Crafted with high-grade resin and aluminium powder, enhanced by our independently developed formula improvements and meticulous, disciplined manufacturing.
The product excels in resistance to yellowing, cracking, tensile stress, staining, load-bearing and fire performance, easily lasting 5 to 10 years and beyond.
Finished with a matte surface, the colour and visual texture can be tailored to design requirements.
Attention
In most cases, MUNK solid surface products can be repaired if accidentally damaged. However, please follow the instructions below to prevent any permanent damage:
1. Avoid contact with strong chemicals such as paint removers, aggressive cleaners, etc. If contact occurs, rinse the surface immediately with plenty of water.
2. Do not cut or scratch directly on the solid surface product.
3. It is recommended to run cold water at the same time when pouring hot water.
How to treat light scratches:
First assess the severity of the scratch. It is advisable to start with the finest grit sandpaper. Sand along the scratch in a straight line, then after a while change the sanding direction by 90° and continue. This ensures all scratches are removed.
Note:
If sanding with the finest grit takes too long, consider switching to a coarser grit.
To minimize dust generation during sanding, dampen the surface before sanding.
After using sandpaper, rinse it to remove residue. Dry the rinsed sandpaper and store it properly for future use.
Surface care:
1. For most dirt and stains: Clean with soapy water or an ammonia-based cleaner, rinse and dry.
2. Water marks: Wipe the marks with a damp cloth, then buff dry with a dry cloth.
If stains persist after these methods, treat them as you would for removing scratches.
