Artificial stone wall-mounted basin

Reference Price:USD/pcs
Brand:MUNK
Material No.:EMUTAGZ1
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:P14401
Country of Origin:Guangdong Province, China
Suitable Crowd:Universal
Color:
White Series
Content:Engineered stone
Finish:Matte
Brand Name:MUNK
Category:Sanitaryware/Basin Series/Wall-mounted Basin
Customizable:Yes
Overview
Product Details/cases/detailed Images
Product Details/cases/detailed Images
Case Diagram
Case DiagramMaterial Image

Details

Solid surface wall-mounted basin, available in composite acrylic and solid acrylic versions.

Product dimensions: 400 x 420 x 450 mm

Matte finish; color and pattern can be customized to match design requirements.

Made with high-quality resin and aluminum powder, combined with our independently developed refined formula and precise, meticulous production.

The product excels in yellowing resistance, crack resistance, tensile strength, stain resistance, load-bearing capacity, and fire resistance, ensuring durability for 5 to 10 years and beyond.

Attention

In most cases, MUNK solid surface products can be repaired if accidentally damaged. However, please follow the instructions below to prevent any permanent damage:

1. Avoid contact with strong chemicals such as paint removers or aggressive cleaning agents. If contact occurs, immediately rinse the surface with clean water.

2. Do not carve or scratch directly on the solid surface product.

3. When filling with hot water, it is recommended to run cold water at the same time.


Treatment of light scratches:

First assess the severity of the scratch. Begin with the finest sandpaper. Sand along the scratch in a straight line, then change direction by 90° and continue sanding. This ensures all scratches have been removed.

Note:

If using the finest sandpaper takes too long, you may switch to a coarser grit.

To minimize dust during sanding, wet the surface before starting.

After use, rinse the sandpaper to remove residues. Dry it thoroughly and store it properly for future use.


Surface care:

1. Most dirt and stains: Use soapy water or an ammonia-based cleaner, rinse, and wipe dry.

2. Watermarks: Wipe with a damp cloth, then dry with a clean cloth.

If stains persist after the above methods, treat them following the scratch removal procedure.