All Steel Anti-static Raised Floor

Reference Price:USD/㎡
Brand:Lingding
Material No.:EP4RG5VG
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:HDG.600.35.Q.D
Country of Origin:Jiangsu Province, China
Size(mm):600*600mm
Color:
White Series
Content:Bottom plate made of deep-drawn steel plate, top plate made of hard SPCC steel plate, upper and lower steel plates stamped and spot-welded, surface phosphated and powder-coated, hollow shell filled with foamed cement, after curing forms a stable load-bearing structure, top surface can be bonded with high wear-resistant anti-static HPL veneer, etc., paired with network-connected support frame
Indoor & Outdoor:Indoor
Finish:PVC veneer,HPL Veneer,Ceramic Veneer,Rubber Veneer
Concentrated Load (KG):200-300-450-560kg
Raised Floor Height(mm):80-1300mm
Flammability:A2
Brand Name:Lingding
Series Name:Anti-Static Flooring
Category:Flooring/Raised Flooring/Static-resistant Raised Flooring
Customizable:Yes
Overview
Product Details/cases/detailed Images
Product Details/cases/detailed Images
Structural Diagram
Structural DiagramMaterial Image
Case Diagram
Case Diagram

Details

Product Introduction

Product Name: Full-Steel Edgeless Anti-Static Raised Floor

Dimensions: 600×600×35 mm

Applications:

Widely used in computer centers, communication hubs, data centers, radio & TV broadcasting centers, power control and dispatching centers, microwave communication stations, satellite ground stations, mobile communication facilities, program-controlled telephone exchanges, radio and TV editing and control rooms, and other specialized equipment rooms.

Product Structure:

The bottom plate is made of deep-drawn steel sheet, and the top plate uses hard SPCC steel. The upper and lower steel sheets are stamped and spot-welded, then phosphated and powder-coated. The hollow core is filled with foamed cement, which, after curing, forms a stable load-bearing structure. The top surface can be laminated with high-wear-resistant anti-static HPL, and the system is assembled with interconnected pedestals, square tube stringers, and screws.

Product Features:

1. Excellent structural stability provided by the four-edge support of the panel, pedestal, and stringer.

2. Finished floor height adjustable from 100 mm to 1500 mm for easy maintenance.

3. Permanent anti-static, fire-resistant, and dust-proof.

4. Easy to dismantle and reassemble — fully reusable.

Attention

1. Temperature and Humidity Control: For computer rooms, data centers, and similar environments, strict temperature and humidity ranges are essential. Keep the ambient temperature between 15°C and 35°C and the humidity between 45% and 75% RH to ensure the anti-static floor performs properly and lasts longer. 2. Daily Use Precautions: (1) Avoid any construction work with sharp tools on the floor surface – scratches or damage can ruin the appearance and compromise anti-static properties. (2) Never place items heavier than the floor's rated load on the floor, and do not jump from heights onto the floor, as excessive weight or impact can deform the pedestals and damage the panels. (3) When moving equipment, never slide it directly over the floor. If the equipment is light, lift and carry it. If lifting is not possible but the distance is short, place soft, non-abrasive material (e.g., felt, blanket) under the equipment and slide it slowly. (4) Heavy equipment must be placed on a foundation or base on the subfloor, not directly on the anti-static floor, to prevent permanent deformation under long-term weight. (5) After floor installation, maintain good ventilation, and keep indoor air circulating during daily use. (6) Protect the floor from water. If liquids are spilled, dry the area immediately with a dry mop before moisture penetrates the surface. For general stains, use a slightly damp mop that does not drip, and wipe dry. (7) Do not place heat-generating items (e.g., kitchenware) on the floor to avoid heat-induced deformation. Place a shoe scraper mat at entrances to reduce scratching from sand and grit tracked in by foot traffic.