
Smart Bioethanol Fireplace
.jpg?x-oss-process=image/resize,w_900,m_lfit)

Details
The burner tray is isolated from the fuel tank for enhanced safety. During ignition, fuel is pumped into the burner tray by a fuel pump and ignited by the igniter inside the tray. The burner tray is equipped with liquid level sensors, temperature sensors, and other safety devices. When fuel runs low, sensors send a signal to refill the tray, and the cycle continues. The entire operation is controlled by the main control system.
➢ Fuel requirements for the smart ethanol fireplace:
Use 95% bioethanol (ethyl alcohol). Do not use methanol.
➢ Smart ethanol fireplace features:
A real-flame fireplace that requires no venting
Clean and tidy / No smoke, no odor / Real flame / Easy installation
➢ Smart ethanol fireplace applications:
Combines decorative appeal with heating in one unit
Attention
1. Store bioethanol fuel in a cool, safe place. Always use fuel with a purity of at least 95%; lower concentrations will affect flame height and color. Never add fuels containing synthetic ethanol (industrial alcohol) – these often contain formaldehyde and other harmful substances.
2. Keep children away from the ethanol fireplace to prevent burns.
3. Only pour the amount of fuel needed for the desired burn time, and do not overfill. For best results, keep the fuel level about 2 cm below the top of the burner tray to reduce evaporation. After refilling, wipe away any spilled fuel with a dry cloth and make sure no residue remains on the surface.
4. Always use the provided long-reach lighter to ignite the fireplace. Never use standard pocket lighters, matches, or any other ignition source – this can cause accidental burns.
5. To extinguish or stop the flame during use: use the dedicated tool to slide the lid over the burner opening, fully closing the burner tray.
6. Never refill the fireplace while it is burning or still hot – doing so can cause a fire or serious personal injury. If the fuel runs out during use, wait until the flame has completely extinguished and the unit has cooled down. Confirm there are no embers or flames before refilling with bioethanol.
7. Before relighting, always open the burner lid and allow the chamber to vent for 3–5 minutes. Alcohol vapours can build up inside the burner tray and ignite suddenly. A few minutes of ventilation ensures a safe, controlled ignition.
8. The fireplace consumes oxygen from the room, so always maintain adequate ventilation.
