
Anti-formaldehyde Ultra-matte Interior Latex Paint




Details
Product Description: Dulux Professional Care Formaldehyde-Resistant Ultra Matt Interior Wall Paint employs an innovative high-efficiency formaldehyde removal factor technology that enables the paint film to powerfully absorb and rapidly decompose formaldehyde, significantly reducing airborne formaldehyde levels. Combined with a powerful anti-mould formula, it effectively prevents and inhibits mould growth in humid environments, making it suitable for decorating and protecting a variety of interior wall surfaces.
Recommended Use: Suitable for the decoration and protection of various interior wall surfaces, such as plastered surfaces and plasterboard.
Principal Ingredients: Lead-free pigments, acrylate copolymer, water, additives
Volume Solids: 30% (nominal) for white
Drying Time (at 25°C, 50% RH, single coat):
Touch Dry: 0.5–1 hour
Recoat: 2–3 hours
Drying time will vary with temperature and humidity.
Film Thickness:
Wet Film: 80 microns
Dry Film: 24 microns
Colour: White or custom-tinted
Sheen: Matt
Pack Size: 20 L
Storage: Store in a cool, dry place. Protect from freezing.
Shelf Life: 36 months
Benefits:
Long-lasting, highly efficient formaldehyde purification
Outstanding mould resistance
Excellent application properties
Low odour, safe and environmentally friendly
Typical Paint System:
Primer: Dulux Professional Interior Primer 2200 A914-65972 (1 coat)
Topcoat: Dulux Professional Care Formaldehyde-Resistant Ultra Matt Interior Wall Paint R7304 (2 coats)
Attention
Surface Preparation:
Ensure surfaces to be painted are completely free of grease, dust and loose material. New plaster or concrete must be thoroughly dry. The moisture content of the substrate (or filler) must be below 14%, and the pH value must be under 10. Bare wood or ferrous metal surfaces should be treated with a suitable primer first.
New Walls:
1. New concrete walls must cure for at least 30 days before applying filler.
2. Do not mix filler too loosely. After the filler is fully dry, sand it smooth with fine sandpaper and remove all dust.
3. For optimal results, apply one coat of Dulux Professional Interior Primer 2200 A914-65972 first.
Previously Painted Walls:
1. When repainting, scrape off loose or flaking paint with a scraper, sand the surface, and remove all dust to eliminate poorly adhered material and peeling film.
2. Fill any defects with a suitable filler.
3. For optimal results, apply one coat of Dulux Professional Interior Primer 2200 A914-65972 to properly prepared surfaces.
Moldy Walls:
1. Scrape and sand away visible mold stains.
2. Apply a suitable mold wash solution, rinse promptly with clean water, and allow to dry completely.
3. For optimal results, apply one coat of Dulux Professional Interior Primer 2200 A914-65972 to properly prepared surfaces.
Application Guidelines:
1. Read the product instructions before starting work.
2. Stir the paint thoroughly after opening the container.
3. If necessary, add the recommended amount of clean water. Do not over-dilute.
4. Avoid overloading the brush or roller with paint during application.
5. Never pour diluted paint back into the original container.
6. Use the opened product as soon as possible.
Application Details:
Theoretical Coverage: Theoretically, 1 litre of this product covers 11–13 square metres per coat. Actual coverage will vary depending on application method and surface texture.
Tools: Brush, roller, conventional spray, or airless spray.
Thinning: Depending on the ease of application and temperature, add up to 20% clean water by volume. Do not exceed 20%.
Brush or roller: Typically add 1 part water to 5–10 parts paint (10–20%).
Conventional spray: Typically add 1 part water to 5–10 parts paint (10–20%).
Airless spray: Generally, do not add water.
Spraying Recommendations:
Conventional spray: Most equipment will achieve satisfactory results.
Airless spray: Typical airless spray setup: minimum working pressure 140 kg/cm² (2000 psi), tip size 0.58 mm (23 thou), fan angle 65°.
Cleaning: Clean all tools with clean water immediately after use.
Application Precautions: Do not sand the final topcoat. If the first topcoat has been sanded, ensure the final topcoat is evenly applied over it. Do not apply when the substrate temperature is below 10°C or when the ambient relative humidity exceeds 85%. When applying deep or vivid colours, thin by no more than 5% (or do not thin), and apply additional coats as needed until a satisfactory finish is achieved (refer to the Deep/Vivid Colour Application Guide).
Safety, Health and Environmental Information:
Keep the container tightly closed and out of the reach of children.
Wear an appropriate dust mask when sanding surfaces.
Ensure good ventilation during application and drying.
Do not breathe in paint vapour or spray mist.
When spraying in poorly ventilated areas, use suitable respiratory protective equipment. All respiratory equipment must comply with approved standards (e.g. NIOSH/MSHA).
Keep the product away from food and drink.
Wear protective eyewear and gloves when handling paint.
In case of eye contact, rinse immediately with plenty of clean water and seek medical attention.
If paint gets on skin, wipe off excess, then wash with soap or a suitable cleanser and water.
If swallowed, seek medical help immediately and show this container or label.
When transporting paint, handle carefully and keep the container in an upright position with the lid facing up.
In the event of a spill, cover with sand or earth, collect and dispose of properly.
Do not pour paint into sewers or drains.
Dispose of paint waste in accordance with local environmental regulations.
