
Artificial stone wall-mounted basin with shelf


Details
This product combines an engineered stone wall-mounted basin with a matte stainless steel frame. It features an integral basin in solid cement-yellow, a matte black stainless steel frame, and an engineered stone shelf, delivering a distinctive industrial design with a bold personality.
Product dimensions: 1400 × 550 × 242 mm
The surface boasts a matte finish; colors and patterns can be customized to meet design specifications.
We use premium resin and aluminum powder, combined with our independently developed and refined formula and strict, meticulous production processes.
The product excels in anti-yellowing, crack resistance, tensile strength, stain resistance, load-bearing performance, and fire protection, providing a lifespan of 5 to 10 years or more.
Attention
In most cases, MUNK solid surface products can be repaired if accidentally damaged. However, please strictly follow the instructions below to prevent any permanent damage:
1. Avoid exposing the product to any strong chemicals, such as paint removers, heavy-duty cleaners, etc. If contact occurs, immediately rinse the surface with plenty of water.
2. Do not deliberately scratch or carve directly on the solid surface product.
3. It is recommended to run cold water simultaneously when pouring hot water.
Handling Minor Scratches:
First assess the severity of the scratch. It is advisable to begin with the finest grit sandpaper. Sand along the scratch in a straight line, and after some time, change the sanding direction by 90° and continue. This ensures all scratches are removed.
Note:
If sanding with the finest grit takes too long, you may try switching to a coarser grit sandpaper.
To minimize dust during sanding, dampen the surface beforehand.
After use, rinse the sandpaper to remove residues. It is recommended to dry the rinsed sandpaper and store it properly for future use.
Surface Care:
1. Most dirt and stains: Wash with soapy water or an ammonia-based cleaner, rinse and dry.
2. Watermarks: Wipe the watermark with a damp cloth, then dry with a clean dry cloth.
If stains persist after using the above methods, treat them using the scratch removal procedure.
