Modern Luxury Art Glass

Reference Price:USD/㎡
Brand:GANG FA GLASS
Material No.:G06186MH
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:GF26WX-C1003
Country of Origin:Guangdong Province, China,Henan, China
Flammability:C
Overall Thickness:13
Surface Sheen:Flat
Color:
Gray Series
Brand Name:GANG FA GLASS
Series Name:Luxe Art Glass
Category:Glass/Art Glass/Crystal
Customizable:Yes
Overview
Case Diagram
Case Diagram

Attention

Art Glass Care & Precautions

I. Standard Cleaning Procedure (General)

1. Approved Cleaning Tools

- Microfiber cloths, pure cotton cloths, soft sponges, small wool brushes, rubber squeegees, lint-free chamois.

- Prohibited: steel wool, abrasive scouring pads, utility knives, stiff brushes, sandpaper, metal scrapers. These easily cause permanent scratches and damage coatings and the tempered glass stress layer.

2. Approved Cleaning Solutions

- Light daily dust: wipe with clean water. Leaves no residue and restores clarity.

- Fingerprints, light grease: mild dish soap diluted with warm water (1:50), or a specialized neutral glass cleaner.

- Bathroom scale, water spots: white vinegar and water (1:10). Spray, let sit for 5 minutes, wipe with a soft cloth, then rinse thoroughly with clean water to prevent vinegar residue from corroding sealant.

- Adhesive residue, paint, stickers: dab a small amount of anhydrous alcohol on a cloth. Always test on an inconspicuous edge first. Do not soak the coated surface.

3. Strictly Prohibited Chemicals

- Strong acids: toilet bowl cleaner, oxalic acid, hydrofluoric acid, rust removers.

- Strong alkalis: caustic soda, drain cleaners, high-concentration bleach.

- Abrasive cleansers, heavy-duty tile & grout cleaners.

These chemicals will corrode the PVB interlayer and glass surface, causing whitening, coating failure, loss of thermal insulation, yellowing, and delamination of the interlayer.

4. Proper Wiping Technique

1) Dust off loose particles with a dry cloth first to prevent scratching from friction.

2) Clean on overcast days, early morning, or evening. Never clean under direct, hot midday sun. Rapid evaporation of cleaning liquids forms stubborn water spots, and extreme temperature differences can cause thermal stress cracking.

3) Squeegee in one direction from top to bottom. Promptly dry water that accumulates along edges and sealant joints to prevent moisture from seeping into the seals.

4) For etched, embossed, or frosted glass, wipe gently following the grain. Use a wool brush for crevices. Do not flood with water.

5) Cleaning frequency: standard doors and windows every 2–3 months; bathrooms, street-facing glass, and coastal or dusty areas monthly.

II. Specialized Care by Glass Type

(A) Laminated Safety Glass (Railings, Skylights, Stair Treads)

1) Avoid prolonged contact with strong acids or alkalis, which accelerate yellowing and delamination of the PVB/SGP interlayer.

2) After rain, promptly remove standing water, leaves, and debris from skylight laminated glass. Persistent water can foster mold growth and penetrate the interlayer.

3) If cracks or bubble expansion appear, stop use immediately and arrange for inspection to prevent whole-panel detachment under impact.

(B) Shower Enclosure Glass

1) After each shower, squeegee water droplets away. Perform a weekly scale-removal maintenance to prevent permanent white stains from mineral buildup.

2) Lubricate hinges and rollers with silicone-based lubricant every six months to keep movement smooth.

3) Replace bottom seals promptly if they become blackened, moldy, or cracked, to prevent water seepage that corrodes the glass edge.

III. Daily Safety Precautions

1) Edges and Corners are the Weak Points of Tempered Glass. Never strike or knock the glass corners or edges. Edge damage greatly increases the risk of spontaneous breakage. Handle and install gently. Keep furniture and metal objects away from glass sides.

2) Load Guidelines

- Open and close doors/windows gently. Avoid slamming or violent force.

- Do not climb, lean heavily, or hang heavy objects on glass railings. Prevent children from impacting them forcefully.

- Do not paste large, heavy decals or hang heavy items on the glass surface. Uneven localized stress can cause cracking.

3) Temperature Taboos

- Never splash cold water directly onto hot glass (from sun exposure, sauna heat, or hot countertops).

- In winter with significant indoor/outdoor temperature differences, avoid directing large amounts of hot steam onto cold glass.

4) Environmental Protection

- In coastal high-salt-spray areas, regularly rinse exterior glass with clean water. Long-term salt adhesion corrodes glass and sealant.

- During renovation, prevent cement slurry, putty, and paint from splashing onto the glass. If adhered, promptly clean with warm water and a soft cloth. Once fully dried, it becomes extremely difficult to remove.

IV. Hardware & Seal Maintenance (Extends Overall Glass Lifespan)

1) Every six months, clean dust and sand from tracks, hinges, and railing fasteners, and apply lubricating grease to prevent jamming that could pull and stress the glass.

2) If sealant or weatherstripping cracks, hardens, detaches, or leaks, promptly reapply neutral, weather-resistant sealant or replace the strips.

3) Regularly clear drainage holes to prevent rainwater from backing up into the glass cavity.

V. Fault Identification & Suggested Actions

1) Fine surface scratches: Light scratches can be professionally polished. Deep scratches cannot be repaired; replacement is recommended.

2) Interior fogging or water droplets in insulated glass units: Indicates seal failure. No repair method exists; replace the IGU.

3) Laminated glass interlayer yellowing, bubbles, or delamination: Indicates interlayer aging and a safety hazard. Replace promptly.

4) Radial cracks or star-shaped breakage: Stop use immediately to prevent injury from shattering. Contact after-sales service for replacement.

VI. Long-Term Care Summary

1) Three “Nos” for Cleaning: No hard tools, no strong acids/alkalis, no high-temperature cleaning.

2) Three “Protects” for Use: Protect edges/corners, avoid sudden temperature changes, avoid concentrated heavy loads.

3) Three Regular Checks: Check sealant, check hardware sturdiness, check for glass cracks or fogging.