
1/1
Find
Fabric Wallcovering
Reference Price:USD/㎡
Brand:NOCKY BROTHERS
Material No.:GL16ABK1
Supplier: CONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:NQ0114
Color:Gray Series
Content:100D semi-dull lightly interlaced elastic warp yarn / 150D semi-dull low elastic yarn
Width:2.8 m
Surface Treatment:High-precision yarn-dyed fabric
Flammability:B1
Lightfastness:4
Seamless Match:YES
Brand Name:NOCKY BROTHERS
Category:Wallpaper/Non-woven Wallpaper
Customizable:Yes
Overview
Case Diagram










Details
Usable width: 2.95 m
Material: 100D semi-dull light network elastic yarn warp / 150D semi-dull low-elasticity weft
Technique: Polyester yarn-dyed (color warp and weft) jacquard fabric
Warp density: 19200 ends
Weft density: 34 picks
Finished weight (g/m²) ±5%: 280
Water-repellent: Yes
Fire-retardant: No (customizable)
Material: 100D semi-dull light network elastic yarn warp / 150D semi-dull low-elasticity weft
Technique: Polyester yarn-dyed (color warp and weft) jacquard fabric
Warp density: 19200 ends
Weft density: 34 picks
Finished weight (g/m²) ±5%: 280
Water-repellent: Yes
Fire-retardant: No (customizable)
Attention
Seamless Wallcovering Care
· Keep doors and windows closed for 3–5 days after installation; do not use air conditioning or heating.
· During humid spring conditions, close doors and windows and run the air conditioner in dehumidification mode for 2–3 hours. Avoid direct drafts on the wall before the adhesive is fully dry, as this may weaken adhesion.
· Remove ordinary dust with a feather duster or vacuum cleaner. Clean general stains with a damp cloth. For stubborn stains, use a mild neutral detergent and dry with a hair dryer on a cool setting.
· Do not hit or rub the wall with hard objects such as chair backs or table edges. Keep sharp tools away from the wallcovering surface.
· Keep doors and windows closed for 3–5 days after installation; do not use air conditioning or heating.
· During humid spring conditions, close doors and windows and run the air conditioner in dehumidification mode for 2–3 hours. Avoid direct drafts on the wall before the adhesive is fully dry, as this may weaken adhesion.
· Remove ordinary dust with a feather duster or vacuum cleaner. Clean general stains with a damp cloth. For stubborn stains, use a mild neutral detergent and dry with a hair dryer on a cool setting.
· Do not hit or rub the wall with hard objects such as chair backs or table edges. Keep sharp tools away from the wallcovering surface.
