
Raffia Wallcovering
Details
Raffia yarn is made from PA (polyamide), commonly known as nylon – a synthetic fibre. PA offers excellent mechanical strength, heat resistance, wear resistance, chemical resistance, self‑lubrication, a low friction coefficient, some flame retardancy, and easy processability. The raffia yarn used here is imported from Germany, making this a premium wallcovering material.
Attention
Installation Notes:
① Ensure the wall is clean, dry, and free of particles, cracks, and excessive lime. Choose a suitable primer; one with at least 40% solids content is recommended.
② Generally, apply adhesive to the wall and lightly dampen the back of the wallpaper with water. A thin layer of water should be applied to the back. Use a high‑solids adhesive, such as an imported paste or clay‑based adhesive.
③ Seaming: for fine textures, direct butt joints are acceptable; for coarser textures, double‑cutting is recommended for a better finish. Align the pattern carefully. Place kraft paper tape under the cutting line to prevent adhesive from pulling away. Control the cutting pressure to avoid damaging the wall. If unsure, use a stainless steel shim.
④ When wrapping external corners, the thick wallpaper may create hollow spots. Score a line along the corner with the back of a knife to allow the corner to wrap neatly and prevent blistering.
⑤ For large areas, use a short‑nap brush starting from the centre and brushing toward the top and bottom. This prevents wrinkles and bubbles. Avoid squeegees, as they can roughen the surface texture.
⑥ Natural fibre wallcoverings may show slight colour variations at seams; this is a normal characteristic.
