
1/1
Find
SPC Stone Polymer Composite Flooring
Reference Price:USD/㎡
Brand:YOYU
Material No.:H6F1KPB4
Supplier: CONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:YYRZP-005
Country of Origin:Zhejiang Province, China
Overall Thickness(mm):5
Surface Treatment:Wear-resistant
Size(mm):600*110
Color:Brown Series
Indoor & Outdoor:Indoor
Flammability:B1
Brand Name:YOYU
Series Name:SPC Flooring Series
Category:Flooring/Stone Plastic Composite Flooring
Customizable:Yes
Overview
Case Diagram




















Attention
Daily Maintenance of SPC Flooring
- 1 Regular vacuuming and cleaning will keep your floor beautiful and durable. Pay extra attention to high-traffic areas. For deep cleaning, use specially formulated SPC floor cleaner and a cotton mop. You can also clean the floor with warm water mixed with a small amount of mild soap.
- 2 Do not use cleaning products that contain surfactants or leave residues. Using such products may leave a dull film on the floor and could void the product warranty. Before using any cleaning product, test it in a small, inconspicuous area first.
- 3 Use small indoor decorative rugs at all entrances and non-rubber doormats outside. This helps remove dirt and debris from shoes. Clean rugs and doormats regularly. Do not leave them on the floor for extended periods.
- 4 Avoid cleaning products that contain ammonia, wax-based polishes/cleaners, strong acids or alkalis, chlorine-based products, bleach, solvents, etc. Using these products may permanently damage your floor and could void the warranty.
- 5 Do not roll or slide furniture or appliances across the floor. This may damage the floor's finish. Carefully and safely lift and move objects into place. To reduce potential wear and damage, we recommend using furniture leg pads under furniture legs. Clean the protectors regularly to remove any embedded grit.
- 6 Prevent pets from scratching the floor. High heels may cause indentations on the floor. END
Important Notes
- Do not install the flooring over foam underlays, carpet, or other soft, rough, uneven, or irregular surfaces.
- Direct sunlight through large windows and patio doors may cause the floor surface temperature to exceed the product's installation temperature limits. Blinds or curtains should be installed. Rapid temperature changes (such as high heat from direct sunlight) may cause temporary deformation of the flooring in these areas.
- Not recommended for installation in areas with excessive heat and wide temperature fluctuations, such as sunrooms, saunas, solariums, or other spaces where temperatures cannot be maintained between 18-29 °C (64-84 °F). If installed in these areas, the flooring should be glued down to prevent deformation.
