
Composite Locking Rubber Flooring

























Details
The primary materials are Polyvinyl Chloride (PVC) and Calcium Carbonate (natural stone powder). The production process is as follows:
1. Mixing: Raw materials are blended in large mixing machines; 2. Extrusion: The mixture is extruded into a base layer of the required thickness via a continuous production line; 3. Steam Hot Pressing: A 500-ton steam hot press bonds the decorative film, wear layer, and base layer together for 45 minutes; 4. Conditioning: The product is allowed to rest for 24 hours in contact with air; 5. Tempering: The product passes through a 100-meter-long series of cold and hot water baths to stabilize it through thermal expansion and contraction; 6. Conditioning: Another 24-hour rest in contact with air; 7. Profiling: Cutting to size and milling the click-lock system; 8. Testing: Passes laboratory inspection; 9. Attachment: Acoustic underlayment is applied; 10. Packaging; 11. Warehousing. Available sizes: 600×125 / 600×100 / 1220×150
Attention
1. First remove dust and debris from the surface of the click-lock flooring.
2. Clean away any maintenance wax, grease, dust, and other stains; use a wet vacuum to extract the dirty water.
3. Rinse with cold water and extract.
4. If necessary, apply 1–2 coats of high-strength surface wax.
