LED Surface-Mounted Downlight

Reference Price:USD/set
Brand:JOJO
Material No.:HXBFS93H
Supplier: CONTACT USCONTACT US
Reset
Beam Angle:
Power(W):
Color Temperature(K):
Model:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:JLFW313-3x7W-45°
Indoor/Outdoor:Indoor Use
Application:Bathroom,Bedroom,Corridor,Dining Room,Home Theater,Kitchen,Living Room,Lobby,Meeting Room,Other,Pantry,Study,Tea Room,Walk-in Closet
Voltage:220v
Beam Angle:45°
Chip requirements:CREE
Accessory:Stretched sheet
Color:
Black Series
Angle adjustment:NO
Color Rendering Index:≥90
Color Temperature(K):2400,2700,3000,3500,4000,5000
Color Tolerance:≤5
Dimming Control:Non-Dimmable
Hole(mm):Surface Mounted
Lamp Type:Surface Mounted Downlight/Spotlight
Installation Method:Flush Mount
Light Intensity:2030
Lead time:20 days
Material:1. Lamp body is die-cast from high-quality aluminum, finished with anodized electrostatic powder coating; 2. Light source chip uses CREE (USA) or equivalent brand chip, delivering soft, glare-free illumination; 3. The outer trim color of the lamp housing must match the installation surface finish, provided by the lighting supplier or contractor (as decided by the client), with material sample supplied by the interior fit-out contractor.
Light Source Lifetime(hrs):30000
Luminous Flux(LM):1295
Power(W):3*7
Remark:\
Ingress Protection Rating:IP20
Size(mm):95*285*H110
Brand Name:JOJO
Series Name:Colin
Category:Engineering Lighting/Ceiling
Customizable:Yes
Overview
Product Details/cases/detailed Images
Product Details/cases/detailed Images
Case Diagram
Case DiagramMaterial ImageMaterial ImageMaterial Image

Details

The housing is die-cast from high-quality aluminum with an electrostatically powder-coated finish. The LED chips use imported Lumileds, CREE, or equivalent brands. The beam has a soft, gradual fade without harsh edges, and it can be equipped with a dedicated dimming driver for flicker-free dimming. Multiple installation options are available: surface mount, yoke mount, suspended by wire or rod. Available in a full range of sizes to meet various spatial needs, solving the problem of installing lights in grid or linear diffuser ceilings.

Attention

1. Do not install this product on fragile, easily deformed, or unstable ceilings.
2. The installation must comply with all applicable fire safety regulations.
3. Always disconnect power before installation, maintenance, or replacing the light source.
4. Under no circumstances should the luminaire be covered with thermal insulation or similar materials.