Inner Thigh Trainer

Details
Attention
Proper Use
1. Do not exceed the weight limit of the training equipment.
2. If safety stops are provided, adjust them to the appropriate height.
3. Adjust the seat, leg pad, foot pad, range-of-motion limiter, or any other adjustment device to a comfortable starting position as much as possible. Make sure all adjustment devices are fully locked to prevent sudden movement and injury.
4. If a training bench is provided, sit on it and adjust to the proper training position.
5. Do not exceed a weight you can safely lift and control during training.
6. Perform exercises under reasonable control.
7. Return the weight stack to its resting position.
Warranty
If you are in North America, please visit matrixfitness.com for warranty information, as well as exceptions and limitations of the warranty.
Product Specifications
User Weight Capacity: 136 kg / 300 lbs
Training Weight Capacity
G7-S74: 93.4 kg / 207.5 lbs
G7-S74B: 68 kg / 150 lbs
G7-S74BH: 90 kg / 200 lbs
Product Weight
G7-S74: 272 kg / 600 lbs
G7-S74B: 241 kg / 531.5 lbs
G7-S74BH: 263 kg / 581.5 lbs
Overall Dimensions (L x W x H)*: 182 x 173 x 135 cm / 71.6 x 67.8 x 53 inches
* Always allow at least 0.6 m (24 inches) of clearance around MATRIX strength equipment for access and passage. Please note that the Americans with Disabilities Act (ADA) recommends a wheelchair passage width of 0.91 m (36 inches).
Maintenance Checklist
Action | Frequency
Clean upholstery (1) - Once daily
Inspect cables (2) - Once daily
Clean guide rods - Once a month
Check hardware - Once a month
Inspect frame - Twice a year
Clean equipment - As needed
Clean grips (1) - As needed
Lubricate guide rods (3) - As needed
(1) Clean upholstery and grips with mild soap and water or an ammonia-free cleaner.
(2) Inspect cables for cracks or wear; replace immediately if worn. If cables feel loose, tighten them without lifting the top plate.
(3) Lubricate guide rods with a Teflon lubricant. Apply lubricant to a cotton cloth and wipe the rods up and down.
