1/2
Find
Flexible Silicone LED Strip
Reference Price:USD/m
Brand: MERCANVEE
Material No.:IOSCDG91
Supplier: CONTACT US
Reset 
Beam Angle:
Power(W):
Color Temperature(K):
Model:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:MVT-NS-1616-Silicone RBGW
Application:Building,Commercial High Space,Conference,Education & Office,Exhibition Display,Hotel
Indoor/Outdoor:Indoor Use
Voltage:DC24V (driver not included)
Dimming Control:0-10V Dimming,DALI dimming,ZIGBEE,Triac dimming
Hole(mm):16*16
Installation Method:Recessed
Lead time:7-15 days
Lamp Type:Soft Linear Light Strip
Light Source Lifetime(hrs):30000
Luminous Flux(LM):50LM/W
Beam Angle:120°
Light Intensity:200
Accessory:No Accessories
Power(W):18W/M
Material:Housing with premium silicone sleeve, high-quality transparent glue potting, flexible substrate, and high CRI chips; light source uses OSRAM 5050 chips with soft, glare-free illumination; equipped with dedicated LED driver, flicker-free, lifespan up to 30,000 hours.
Ingress Protection Rating:IP65
Chip requirements:Osram or equivalent brand chip
Size(mm):L5000*W16H16
Color Temperature(K):RGBW
Color Tolerance:≤5
Remark:Contractor shall verify all correct dimensions of luminaires on site, and provide construction drawings and luminaire samples to the lighting consultant for approval; the actual quantity of low-voltage 24VDC switched diode electronic voltage-regulated power supply units shall be confirmed by the contractor/supplier
Color:White Series
Color Rendering Index:>90
Brand Name: MERCANVEE
Series Name:Light Strip
Category:Engineering Lighting/Flexible
Customizable:Yes
Overview
Product Details/cases/detailed Images

Product Details/cases/detailed Images

Case Diagram






Details
The strip light features a premium silicone sleeve, flexible PCB, and high-CRI LED chips. The light source uses OSRAM 2835 chips, delivering soft, glare-free illumination. Equipped with a dedicated LED driver, it is flicker-free and has a lifespan of up to 30,000 hours.
Attention
This is a 24V low-voltage LED strip. Always connect it to a compatible LED driver before connecting to the 220V mains supply. Failure to do so will cause irreversible damage to the strip (do not hot-plug). The strip must not be covered by thermal insulation or similar materials.
