
Wall-hung bidet


.jpg?x-oss-process=image/resize,w_900,m_lfit)
.jpg?x-oss-process=image/resize,w_900,m_lfit)
Details
This bidet is crafted from 100% acrylic solid surface.
Dimensions: 520×362×280 mm
Custom colours and veining patterns are available upon request.
We use premium resin and aluminium powder, combined with our proprietary improved formulation and meticulous manufacturing process.
The product delivers outstanding performance in anti-yellowing, crack resistance, tensile strength, stain resistance, load-bearing capacity and fire rating.
Attention
In most cases, MUNK solid surface products can be repaired if accidentally damaged. However, please be sure to follow these instructions to prevent any permanent damage:
1. Avoid contact with strong chemicals such as paint removers, powerful cleaners, etc. If contact occurs, rinse the surface immediately with plenty of water.
2. Do not scratch or carve directly on the solid surface product.
For minor scratches:
First assess the severity of the scratch. We recommend starting with the finest sandpaper. Sand along the scratch in a straight line, then change direction by 90° and continue sanding. This ensures all scratches are removed.
Note:
If sanding with the finest grit takes too long, you may try a coarser sandpaper. To minimize dust, wet the surface before sanding. After use, clean the sandpaper to remove residues; rinse well, dry, and store for future use.
Surface treatment:
1. Most dirt and stains: Use soapy water or an ammonia-based cleaner, then rinse and dry.
2. Water marks: Wipe with a damp cloth, then dry with a dry cloth.
If stains persist after using the above methods, treat them like scratches.
