LVT Stone Effect Flooring (Color)

Reference Price:USD/㎡
Brand:WALRUS
Material No.:JLJMIIK1
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:HXS181
Country of Origin:Zhejiang Province, China
Abrasion Resistance Class:Class P
Size(mm):457.2*457.2*3.0mm,610*305*3.0,914.4*457.2*3.0
Color:
Gray Series
Content:Solid base
Surface Treatment:UV
Flammability:B1
Castor Chair Resistance:After 25000 cycles, floor surface has no delamination, cracking or other damage, gloss change allowed
Wear Layer Thickness(mm):0.3
Slip Resistance:R9
Indoor & Outdoor:Indoor
Overall Thickness(mm):3.0
Brand Name:WALRUS
Series Name:WPC/SPC/LVT Non-Slip Series
Category:Flooring/PVC Flooring
Customizable:Yes
Overview
Case Diagram
Case DiagramMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial Image

Details

Attention

* Remove dirt and debris promptly. The first maintenance session should be performed at least 24 hours after installation.

* Never allow the floor to sit in standing water. Prolonged water exposure can seriously shorten its lifespan. Use a wet vacuum to extract moisture immediately during cleaning.

* Do not use water or liquid cleaners to soak the floor, and do not leave puddles on the surface.

* Never use hard or abrasive cleaning tools such as steel wool or metal brushes. Protect the floor from sharp objects that could scratch the surface.

* It is highly recommended to place entrance mats in high-traffic public areas to trap dirt and grit that can scratch and dull the flooring.

* Use non-aggressive maintenance products, such as liquid neutral cleaners, microfiber mops, and soft cloths.

* Avoid contact with strong solvents like toluene or lacquer thinner, as well as strong acids and alkalis. Do not use inappropriate tools or sharp instruments that can gouge or damage the surface.

* Do not expose the floor to intense sunlight. Maintain indoor temperatures at or below 30°C (86°F) after installation.