
Artificial stone wall-mounted basin



Details
Solid surface wall-mounted basin, available in composite acrylic and pure acrylic versions.
Dimensions: 800 × 490 × 180 mm
Made with high-quality resin and aluminium powder, combined with our independently developed and refined formula and meticulous production.
Excellent resistance to yellowing, cracking, tensile stress, staining, as well as superior load-bearing and fire performance. Durable for 5–10 years or more.
Matt finish; colours and patterns can be customised to your design requirements.
Attention
In most cases, MUNK solid surface products can be repaired if accidentally damaged. However, please follow the instructions below to prevent any permanent damage:
1. Avoid contact with strong chemicals such as paint removers, aggressive cleaners, etc. If contact occurs, rinse the surface immediately with plenty of water.
2. Do not cut or scratch directly on the solid surface product.
3. It is recommended to run cold water at the same time when pouring hot water.
How to treat light scratches:
First assess the severity of the scratch. It is advisable to start with the finest grit sandpaper. Sand along the scratch in a straight line, then after a while change the sanding direction by 90° and continue. This ensures all scratches are removed.
Note:
If sanding with the finest grit takes too long, consider switching to a coarser grit.
To minimize dust generation during sanding, dampen the surface before sanding.
After using sandpaper, rinse it to remove residue. Dry the rinsed sandpaper and store it properly for future use.
Surface care:
1. For most dirt and stains: Clean with soapy water or an ammonia-based cleaner, rinse and dry.
2. Water marks: Wipe the marks with a damp cloth, then buff dry with a dry cloth.
If stains persist after these methods, treat them as you would for removing scratches.
