
Heated Towel Rack






Attention
Important Safety Notes
Power Cord
1. Use only the supplied power cord. Using a different cord may cause overheating and fire due to incorrect voltage.
2. Do not use a damaged power cord. If the cord is damaged, it must be replaced by a designated service center. Never attempt to replace it yourself.
3. Do not pull the plug out by yanking the cord. Always grasp the plug firmly to disconnect.
4. Do not pull or drag the power cord.
5. Do not bundle or knot the power cord.
6. Do not twist or excessively bend the power cord.
7. Do not place heavy objects on the power cord.
During Use
1. If any abnormality or malfunction occurs, stop using the product immediately and unplug the power cord/plug. (If you hear unusual noises, see smoke, feel excessive heat, or notice a strange odor, disconnect the plug immediately and contact the service center.)
2. Do not place medications or chemicals on the shelf. (Spilled chemicals may cause a short circuit and lead to fire.)
3. Do not use flammable aerosol sprays near the electric towel warmer.
4. In the event of a gas leak, do not operate any function of this product. (Sparks may cause an explosion.)
5. Do not spray water or any other liquid directly inside the product. (This may cause a short circuit, resulting in electric shock or fire.)
6. Do not disassemble, repair, or modify the product yourself. (This may cause electric shock or fire.)
Power Plug
1. Do not plug or unplug the power plug with wet hands. (Wet hands increase the risk of electric shock.)
2. Ensure the power plug is fully inserted into the outlet. (A partially inserted plug may cause electric shock, overheating, or fire.)
3. Do not overload a single outlet by connecting too many plugs or using multiple extension cords. (This can exceed the rated current, causing overheating, poor contact, deformation, smoke, ignition, and fire.)
4. Regularly inspect the power plug and cord for abnormalities such as overheating, rust, warping, or cracking. (Such defects may cause a short circuit and lead to fire.)
5. Regularly clean the power plug with a dry cloth. (Dust accumulation on the plug can absorb moisture and cause inadequate insulation, leading to fire.)
6. Always unplug the power plug before touching the main body of the product or cleaning it. (Failure to do so may result in electric shock and injury.)
7. When the product will not be used for an extended period, unplug the power plug. (This reduces the risk of electric shock and injury.)
Care and Maintenance
1. Clean with a soft cloth or sponge dampened with warm water. (Cleaners containing corrosive agents or bleach may damage the product.)
2. If using a chemical cleaning wipe, follow its instructions for use.
3. Always turn off the power or unplug the product before performing any maintenance or repair on the towel warmer.
4. For indoor installation and use only.
5. Do not use steel wool or other hard, abrasive tools for cleaning, as they may damage the surface.
6. To avoid discoloration and accelerated aging, do not use thinners, alkaline cleaners, benzene, alcohol, disinfectants, or similar substances.
7. Do not hang color-leaching towels or undergarments on the product surface.
8. Avoid impact to the housing.
