
Solid Surface Freestanding Bathtub




Details
Solid surface bathtub, available in composite acrylic and pure acrylic versions.
Dimensions: 1600 x 950 x 600 mm.
The surface has a matte finish, and the color and decorative pattern can be customized to suit design requirements.
We use high-grade resin and aluminum powder, paired with our independently developed and enhanced formula and rigorous manufacturing.
The product demonstrates outstanding performance in yellowing resistance, crack resistance, tensile strength, stain resistance, load-bearing capacity, and fire resistance—lasting five to ten years or longer.
Attention
In most cases, MUNK solid surface products can be repaired if accidentally damaged. However, please strictly follow the instructions below to prevent any permanent damage:
1. Avoid exposing the product to any strong chemicals, such as paint removers, heavy-duty cleaners, etc. If contact occurs, immediately rinse the surface with plenty of water.
2. Do not deliberately scratch or carve directly on the solid surface product.
3. It is recommended to run cold water simultaneously when pouring hot water.
Handling Minor Scratches:
First assess the severity of the scratch. It is advisable to begin with the finest grit sandpaper. Sand along the scratch in a straight line, and after some time, change the sanding direction by 90° and continue. This ensures all scratches are removed.
Note:
If sanding with the finest grit takes too long, you may try switching to a coarser grit sandpaper.
To minimize dust during sanding, dampen the surface beforehand.
After use, rinse the sandpaper to remove residues. It is recommended to dry the rinsed sandpaper and store it properly for future use.
Surface Care:
1. Most dirt and stains: Wash with soapy water or an ammonia-based cleaner, rinse and dry.
2. Watermarks: Wipe the watermark with a damp cloth, then dry with a clean dry cloth.
If stains persist after using the above methods, treat them using the scratch removal procedure.
