
Epoxy Mortar Flooring




Details
Warehouses, underground parking, and heavy machinery manufacturing plants require floors that remain dust-free and can withstand constant traffic from vehicles like cars, forklifts, and trolleys. These floors must not only offer a smooth, level decorative finish typical of standard protective systems, but also deliver exceptional wear and impact resistance.
The epoxy mortar flooring system combines pressure-resistant, abrasion-proof epoxy mortar with an epoxy topcoat to create a highly wear-resistant and impact-resistant surface. It is purpose-built to address the flooring demands of heavy machinery plants, industrial and commercial warehouses, underground parking, and similar environments.
Process: Surface grinding → Defect repair → Epoxy primer NDS001-3 → Epoxy mortar layer NDS002-2 → Epoxy putty layer NDS002-2 → Epoxy topcoat NDS101-1
Attention
1. Allow the surface to cure for 7 days after application before putting it into service; protect it from water and chemical spills during this period.
2. Handle and move furniture carefully; do not drag or pull items across the floor to avoid scratches.
3. Prevent coarse sand, grit, mud and similar debris from being tracked onto the floor during daily use.
4. If the floor is contaminated by chemical spills, wipe it up immediately with a cloth. For routine cleaning, use clean water or a mild detergent.
5. Where machinery may cause oil or fluid leaks at corners and edges, regularly spread sawdust to absorb the oil and then sweep it away.
6. Minor wear or scratches can be repaired locally; for large-area damage, consider re-applying the topcoat by roller.
7. Where practical, apply a protective wax coating before the floor is used to prolong its service life.
