
Texture Paint



Details
/ 100% Made in Italy / Natural lime-based / Three distinctive textures: ultra‑fine, fine and coarse sand / High hardness, breathable, mould‑ and moisture‑resistant / Can create scraped, travertine, dragged, polished and other decorative finishes
RASATO is a mineral coating based on premium lime putty. The lime is slaked and matured for an extended period (to guarantee stability and durability), then blended with carefully selected marble powders of the right particle size, vegetable‑derived ingredients and less than 3% organic materials, along with inorganic earths and oxides (residues comply with DIN 18363, 2.4.6 standard). Using lime as the sole binder maximises the product's breathability, allowing ambient moisture to migrate through the render and the masonry. The high‑purity mineral composition actively inhibits the growth and spread of mould and bacteria. The carbonation (ageing) process builds a strong, stable structure that keeps walls looking fresh for years. RASATO boasts excellent lightfastness; it is non‑flammable, non‑toxic and environmentally friendly. Because of its special mineral character, slight unevenness in hue and colour variations may appear in exterior applications. These occur due to varied absorption rates of the substrate during application and as the surface weathers over time. If the product is exposed to prolonged heavy rain within days of application, especially acid rain, a whitish surface bloom may form, since the carbonation reaction of calcium hydroxide has not yet fully completed. This bloom will disappear with the next heavy rainfall. This is an inherent characteristic of the product and should not be regarded as a defect.
Attention
Before use, ensure the wall is completely dry, structurally sound, and that the surface material is stable and not prone to flaking. Make sure the wall is dry and clean; eliminate any grease, mould, mildew, efflorescence, or other factors that could impair adhesion or affect the final result. During application, ensure the wall temperature and ambient temperature are between 8°C and 35°C, and relative humidity does not exceed 75%. For proper drying, the wall temperature and ambient temperature must both be above 5°C. When applying the product, work continuously to ensure a uniform finish and avoid an uneven, unattractive appearance caused by stop‑start application.
