ABA Composite Click Lock Vinyl Flooring

Reference Price:USD/㎡
Brand:RIEE
Material No.:N2SC7BG0
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:ST-5506
Country of Origin:Anhui Province, China
Abrasion Resistance Class:Class P
Size(mm):300*600/900*450
Color:
Beige Series
Content:Multi-layer composite click-lock vinyl flooring
Surface Treatment:Stone texture embossing, 0.5mm wear layer, wear-resistant surface
Flammability:B1
Wear Layer Thickness(mm):0.5
Slip Resistance:Not tested
Indoor & Outdoor:Indoor
Overall Thickness(mm):6.5+1.5
Brand Name:RIEE
Series Name:Aodiao Stone Texture Series
Category:Flooring/PVC Flooring
Customizable:Yes
Overview
Case Diagram
Case DiagramMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial Image

Details

The main materials of this product are polyvinyl chloride (PVC) and calcium carbonate (natural stone powder). The production process is as follows: 1. Mixing: Raw materials are blended in large mixing machines. 2. Extrusion: The mixed material is extruded into a substrate of the required thickness via a production line. 3. Steam hot pressing: A 500-ton steam hot press laminates the decorative film, wear layer, and substrate together under heat for 45 minutes. 4. Conditioning: The product is left to rest for 24 hours to acclimatize to the air. 5. Tempering: The product is passed through long cold and hot water tanks to stabilize it through thermal expansion and contraction. 6. Conditioning: Another 24-hour rest period for air contact. 7. Profiling: Cutting to the required dimensions and milling the click-lock profile. 8. Inspection: Laboratory testing and approval. 9. Attaching: Acoustic underlayment is applied. 10. Packaging. 11. Warehousing. Available sizes: 300*600 mm and 900*450 mm.

Attention

1. Remove dust and dirt from the surface of the click-lock floor. 2. Clean off any maintenance wax, grease, dust, or other stains from the floor surface, and extract the waste water with a wet vacuum. 3. Rinse with cold water and extract again. 4. If necessary, apply 1-2 coats of high-strength floor finish.