Dual Abdominal Bench

Details
1. Stack weight: 108 kg / 240 lbs
2. Product net weight: 283 kg / 624.5 lbs
3. Dimensions: 139 × 121 × 147 cm
4. Contoured back pad allows muscles to fully relax and stretch; self‑adjusting handles accommodate users of all sizes
5. Dual‑pivot support design encourages natural abdominal contraction; elbow pad wear sleeves extend upholstery life in high‑contact areas
6. Front placard with muscle callouts, exercise‑specific start/finish illustrations, and correct movement guide
7. Frame finish: proprietary two‑coat powder‑coat process
8. Uniform stack‑height tower: 135 cm / 53″
Attention
Proper Use 1. Do not exceed the weight limit of the training equipment. 2. If safety stops are provided, adjust them to the appropriate height. 3. Where possible, adjust the seat, leg pad, foot pad, range-of-motion setting, or any other adjuster to a comfortable starting position. Ensure all adjustment devices are fully locked to prevent sudden movement or injury. 4. If a bench is included, sit on the bench and adjust to the correct training position. 5. Train only with a weight you can safely lift and control. 6. Perform exercises within a controlled range of motion. 7. Return the weight plates to the starting position that supports the plates.
Warranty For North America, visit matrixfitness.com for warranty information and details of exclusions and limitations.
Specifications Maximum User Weight 136 kg / 300 lb Maximum Training Weight G7-S51 111.4 kg / 247.5 lb G7-S51B 72 kg / 160 lb G7-S51BH 108 kg / 240 lb Product Weight G7-S51 290 kg / 640 lb G7-S51B 247 kg / 544.5 lb G7-S51BH 283 kg / 624.5 lb Overall Dimensions (L x W x H)* 139 x 121 x 147 cm / 54.6 x 47.5 x 57.9 in * Always maintain a minimum clearance of 0.6 m (24 in) around MATRIX strength equipment for access and passage. Please note that the Americans with Disabilities Act (ADA) recommends a wheelchair access width of 0.91 m (36 in).
Maintenance Checklist Action Frequency Clean upholstery 1 Daily Inspect cables 2 Daily Clean guide rods Monthly Inspect hardware Monthly Inspect frame Every 6 months Clean machine As needed Clean grips 1 As needed Lubricate guide rods 3 As needed 1 Clean upholstery and grips with mild soap and water or an ammonia-free cleaner. 2 Inspect cables for cracking or wear; replace immediately if damaged. If cables become too loose, tension them without lifting the top plate. 3 Lubricate guide rods with a Teflon-based lubricant. Apply lubricant to a cotton cloth and wipe the rods up and down.
English
Torque Values M10 Bolts (Nyloc Nuts and Flowdrill) 77 Nm / 57 ft-lbs M8 Bolts 25 Nm / 18 ft-lbs M8 Plastic 15 Nm / 11 ft-lbs M6 Bolts 15 Nm / 11 ft-lbs Pad Bolts 10 Nm / 7 ft-lbs
