
6.5 lb Tufted Rug



Details
Construction: High cut pile + high loop + medium loop + low loop;
Material: 80% New Zealand wool + 20% nylon
Yarn height variation: 1–2 mm
Weight: 6.5 lb (approx. 2948 g pile weight)
Pile heights: 12 mm + 10 mm + 8 mm + 6 mm Pile weight: 2948 g
Suitable area: luxury banqueting halls
Pros & cons: Richly layered surface texture; tightly packed surface ideal for high-traffic areas
The detailed drawing provides colour reference only and cannot fully reflect the craft effect; please refer to the physical sample for final approval!
Attention
Shanghai Yibo Carpet Cleaning Recommendations — Carpet Cleaning Guidelines & Procedures
Tools & Materials: utility knife, hand brush, spray bottle, water bucket, clean towels, steel rake, rubbish bags, shoe covers
Equipment: wet/dry vacuum, multi-function floor machine, three-speed air mover
Chemicals: high-foam carpet shampoo, carpet stain remover, de-foamer
Procedure:
1. Thorough vacuuming: Remove all dust from the carpet using a professional vacuum cleaner or wet/dry vacuum.
2. Spot treatment: Spray undiluted carpet stain remover directly onto stained areas, then agitate with a hand brush to lift the stain. Specific stains such as oil, fruit or coffee require dedicated stain removers (e.g., de-greaser or colour stain cleaner). Note: Correctly identify the stain to treat it successfully. Many stains—e.g., coffee with cream—contain both water- and oil-based components, so at least two types of cleaner may be needed. Concentrated stains often require repeated treatment; unless fully removed, stains can gradually reappear as the carpet dries, as residues trapped deep in the fibres or even in the backing wick to the surface. Therefore, treat stains carefully by gently blotting, brushing or hot-water extracting until completely clean. For stains that reappear after cleaning, place a clean white towel over the damp spot and weigh it down with a colour-safe object (such as a plastic container filled with water). Over time, the stain will transfer onto the towel. If there are loose fibres or chewing gum, carefully remove them with a lighter or utility knife and dispose of the waste in a rubbish bag.
3. Dilute cleaning solution: Mix carpet shampoo with water at a ratio of approximately 1:20, adjusting according to the level of soiling. Pour the diluted solution into the tank of the carpet cleaning machine.
4. Overall cleaning: Operate the carpet machine and carefully scrub the carpet with the solution, then extract the dirty solution and loosened soil. (Always add de-foamer to the recovery tank to prevent foam from damaging the vacuum motor; empty the recovery tank when nearly full.) Depending on the degree of soiling, the process may be repeated several times.
5. Drying: After cleaning, the carpet generally needs time to dry (around 12 hours). Avoid walking on the damp carpet; if entry is necessary, use shoe covers to prevent soiling. Using a three-speed air mover to blow air section by section will greatly accelerate drying time.
6. Finalising: Before leaving the site, clean all equipment—wipe off surface dirt and wastewater, clean the vacuum tank, and coil the power cord neatly.
