
Multiwall Polycarbonate Panel






Details

Attention
Manual Cleaning for Small Areas:
1. Gently wash the panel with mild soapy water, using a soft, lint-free cloth or sponge to remove dirt and grime.
2. Fresh paint, grease and glazing putty can be easily removed. Use a soft cloth moistened with petroleum ether (BP65), hexane or heptane, and wipe gently. Afterwards, clean the panel with mild soapy water.
3. A mild automotive wax can be used to minimize scratches and fine abrasions. We recommend testing a suitable polish on a small area of the panel before applying it to the entire surface, following the polish manufacturer’s instructions.
4. Finally, rinse thoroughly with clean water to remove any cleaning residue, and dry the surface with a soft cloth to prevent water spots.
Automatic Cleaning for Large Areas:
1. Use a pressure washer (max 100 bar / 1450 psi) and/or a steam cleaner to clean the surface. We recommend testing on a small area of the panel before cleaning the entire sheet.
2. Avoid using additives in the water and/or steam.
Important Notes for All Polycarbonate Panels:
• Do not use abrasive or highly alkaline cleaners on polycarbonate.
• Do not use aromatic or halogenated solvents such as toluene, benzene, gasoline, acetone or carbon tetrachloride.
• Using incompatible cleaning materials may cause structural and/or surface damage. If in doubt, consult your supplier regarding your cleaning materials.
• Contact with aggressive solvents like methyl ethyl ketone (MEK) or hydrochloric acid can cause surface degradation or even micro-cracking of the polycarbonate panel.
• Do not scrub with brushes, steel wool or other abrasive materials.
• Do not use squeegees, razor blades or other sharp tools to remove deposits or spots.
• Do not clean polycarbonate panels in direct sunlight or at high temperatures, as this may cause discoloration.
• For all chemicals mentioned, please refer to the manufacturer’s Material Safety Data Sheet (MSDS) to ensure proper safety.
