1/2
Find
Recessed Rigid LED Strip
Reference Price:USD/set
Brand: MERCANVEE
Material No.:OFY731OM
Supplier: CONTACT US
Reset 
Beam Angle:
Power(W):
Color Temperature(K):
Model:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:MVM-ALP050-UpDown9.6W
Application:Commercial High Space,Conference,Education & Office,Exhibition Display,Hotel
Indoor/Outdoor:Indoor Use
Luminous Flux(LM):80LM/M
Beam Angle:120°
Material:Housing made of high-quality die-cast aluminum with high-quality PC diffuser; chips use OSRAM chips with soft, glare-free illumination, flicker-free, lifespan up to 30,000 hours.
Light Intensity:280
Light Source Lifetime(hrs):30000
Power(W):9.6W/M
Accessory:No Accessories
Ingress Protection Rating:IP20
Remark:Contractor shall verify all correct dimensions of luminaires on site, and provide construction drawings and luminaire samples to the lighting consultant for approval; low-voltage 24V drivers shall be provided separately according to actual quantity, confirmed by contractor/supplier
Color:White Series
Chip requirements:Osram or equivalent brand chip
Color Tolerance:≤5
Color Rendering Index:>90
Size(mm):L2000*18*49
Color Temperature(K):2700,2700-6500 (Adjustable),3000,3500,4000
Voltage:DC24V (driver not included)
Dimming Control:0-10V Dimming,DALI dimming,ZIGBEE,Triac dimming
Hole(mm):/
Installation Method:Recessed
Lamp Type:Rigid Linear Light Strip
Lead time:7-15 days
Brand Name: MERCANVEE
Series Name:Linear Lighting
Category:Engineering Lighting/Linear
Customizable:Yes
Overview
Product Details/cases/detailed Images

Case Diagram


Details
The fixture body is die-cast from premium aluminum, paired with a high-quality PC diffuser.
The LED strip features OSRAM chips, delivering soft, glare-free, and flicker-free illumination with a lifespan of up to 30,000 hours.
The rigid LED strip consists of an aluminum profile and a 24V low-voltage bare-board LED strip, so the wattage is not limited to 9.6W. The profile can be combined with various LED strips (4.8W/9.6W/14.4W/24W) to suit different requirements.
Attention
The LED luminaire is a 24V low-voltage device. Before use, it must be connected to a compatible driver first, then to the 220V mains power; failure to do so may burn out the LED luminaire (do not hot-swap). The luminaire must not be covered with thermal insulation or similar materials.
