
60cm Fully Integrated Dishwasher



Details
Product Features
Type: 60 cm fully integrated dishwasher
Noise level: 42 dB(A)
Energy / Wash / Drying performance: A+++ / A / A
Place settings: 13 (standard)
Number of programs: 10
Quick wash / Auto wash / Eco wash / Glass care and more
ICS+ intelligent control system
Temperatures (°C): 38; 45; 50; 55; 65; 70; 75
Drying system: air-vent drying with automatic door opening
24-hour delay start
Design
• Electronic button control / Fully integrated panel
Eco & Efficiency
• Water consumption per cycle (L): 8.5
• Energy consumption per cycle (kWh): 0.81
• Annual water consumption (L): 2380
• Annual energy consumption (kWh): 232
Attention
1. The appliance is supplied with a power cord fitted with a Chinese-standard plug, which requires a compatible Chinese 3-pin socket. The water inlet hose, drain hose, and power cord are each 1300 mm long. The water supply point, drain connection, and power socket must NOT be located behind the dishwasher; they must be positioned within 700 mm of the center of the appliance. Extending the inlet hose, drain hose, or power cord is not recommended. The electrical supply and wiring must comply with national standards and match the appliance's requirements (10 A).
2. Install the dishwasher next to the sink cabinet, with the water inlet, drain, and power socket arranged inside the sink cabinet (on the dishwasher side) for easy connection.
3. The factory-fitted inlet hose ends in a 6-point (3/4") female threaded connection. The cold-water shut-off valve at the supply point must point downward and have a 6-point male thread. Water pressure required: 0.3–10 bar. The cold-water shut-off valve is not included; it must be purchased separately.
4. The dishwasher requires a separate drain. The drain outlet must be located on the same side as the power supply and water inlet, with the drain opening at least 500 mm above the floor and an internal diameter of ≥40 mm (the dishwasher's drain hose has an internal diameter of 22 mm); the drain pipe opening should face upward. Do not connect the dishwasher drain hose to a garbage disposal unit or directly to the sink drain, as this may cause backflow, clogging, and damage to the dishwasher.
