
Crystal Art Panel

Attention
Care & Maintenance
Dusting and Light Soil Removal
Edge cleaning: Use compressed air to blow away debris from edges and joins.
Surface cleaning: Use compressed air and/or a clean anti-static cloth to gently wipe the surface. Avoid rubbing to prevent micro-scratches.
Removing Dirt and Fingerprints
For light soiling, use a lukewarm water solution (max 30°C) with a mild, neutral detergent, or a solution of isopropyl alcohol diluted to 50% with water. Apply with a soft sponge, wipe gently, then rinse with cold clean water. Dry with a soft cloth or wet chamois leather to prevent water spots.
For larger surfaces, a pressure washer may be used with cold or lukewarm water (max 10 bar / 145 psi) and a neutral detergent. Ensure all panel edges are sealed to prevent water ingress.
Improper Cleaning Practices (Avoid)
Using cleaning agents not listed above
Wiping dry dirt with a dry cloth
Cleaning panels in direct sunlight or at high temperatures
Using abrasives, scrapers, blades, sharp tools, or rotary brushes
