ABA Composite Click Lock Vinyl Flooring

Reference Price:USD/㎡
Brand:RIEE
Material No.:OR199A2Z
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:CP-9801
Country of Origin:Anhui Province, China
Abrasion Resistance Class:Class P
Size(mm):450*900/300*600
Color:
Color Series
Content:Multi-layer composite click-lock vinyl flooring
Surface Treatment:50 filament wear layer, wear resistant surface
Flammability:B1
Wear Layer Thickness(mm):0.5
Slip Resistance:Not tested
Indoor & Outdoor:Indoor
Overall Thickness(mm):6.0+1.5mm
Brand Name:RIEE
Series Name:Carpet Texture Collection
Category:Flooring/PVC Flooring
Customizable:Yes
Material Spelling
Overview
Case Diagram
Case DiagramMaterial Image

Details

The main materials of this product are polyvinyl chloride (PVC) and calcium carbonate (natural stone powder). The production process is as follows: 1. Mixing: Raw materials are blended in large industrial mixers; 2. Extrusion: The blended material is extruded into a substrate of the required thickness using continuous line equipment; 3. Steam Hot Pressing: A large steam hot press applies 500 tons of pressure to fuse the decorative film, wear layer, and substrate together for 45 minutes; 4. Conditioning: Allow the product to rest for 24 hours to interact with the air; 5. Tempering: Immerse the product in a 100-meter-long series of cold and hot water tanks to stabilize it through thermal expansion and contraction; 6. Secondary Conditioning: Allow the product to rest for another 24 hours to interact with the air; 7. Grooving: Cut to the specified dimensions and mill locking profiles; 8. Testing: Pass laboratory quality inspection; 9. Lamination: Attach the acoustic underlayment; 10. Packaging; 11. Warehousing.

Attention

1. Remove dust and dirt from the surface of the click-lock flooring. 2. Clean and remove protective wax, grease, dust and other stains from the surface, extracting the dirty water with a wet vacuum. 3. Rinse with clean water and extract. 4. If necessary, apply 1-2 coats of high-strength floor finish.