Composite Locking Rubber Flooring

Reference Price:USD/㎡
Brand:RIEE
Material No.:P2W8LBG0
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:MT-6709
Brand Name:RIEE
Series Name:Wood Grain Series I
Category:Flooring/Stone Plastic Composite Flooring
Customizable:Yes
Material Spelling
Overview
Case Diagram
Case DiagramMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial Image
Structural Diagram
Structural Diagram

Details

The primary materials of the product are polyvinyl chloride (PVC) and calcium carbonate (natural stone powder). The production process is as follows: 1. Mixing: blend raw materials using a large-scale mixer; 2. Extrusion: feed the blended material through a continuous extrusion line to form a substrate of the required thickness; 3. Hot pressing: use a large steam hot press at 500 tons of pressure to fuse the decorative film, wear layer, and substrate together for 45 minutes; 4. Conditioning: allow the product to rest in ambient air for 24 hours; 5. Tempering: pass the product through a 100-meter-long cold and hot water bath to improve dimensional stability through thermal expansion and contraction; 6. Conditioning: rest again for 24 hours; 7. Profiling: cut to size and mill the click-lock profile; 8. Testing: pass laboratory quality inspections; 9. Lamination: attach the acoustic underlayment; 10. Packaging; 11. Warehousing. Available sizes include: 600×126 / 914×150 / 1220×180 / 1530×180 / 1800×228 mm.

Attention

1. Remove dust and dirt from the surface of the click-lock flooring. 2. Clear away maintenance wax, grease, dust, and other contaminants from the floor surface; use a wet vacuum to extract dirty water. 3. Rinse with clean water and extract. 4. If needed, apply 1–2 coats of high-strength floor finish wax.