
Wall-hung bidet



.jpg?x-oss-process=image/resize,w_900,m_lfit)
.jpg?x-oss-process=image/resize,w_900,m_lfit)
Details
Attention
In most cases, MUNK solid surface products can be repaired if accidentally damaged. However, please follow these guidelines to prevent any permanent damage:
1. Avoid contact with strong chemicals such as paint removers, aggressive cleaners, etc. If contact occurs, rinse the surface immediately with clean water.
2. Do not cut, scratch, or score directly on the solid surface.
Treating light scratches:
First assess the severity of the scratch. We recommend starting with the finest grit sandpaper. Sand along the scratch in a straight line, then after a while rotate your sanding direction by 90° and continue. This ensures all scratches are fully removed.
Note:
If sanding with the finest grit takes too long, you may switch to a coarser grit.
To minimize dust, wet the surface before sanding.
After use, clean the sandpaper to remove any residue. Rinse it thoroughly, allow it to dry, and store it properly for future use.
Surface care:
1. Most dirt and stains: Use soapy water or an ammonia-based cleaner, then rinse and dry.
2. Water marks: Wipe with a damp cloth, then dry with a soft dry cloth.
If stains persist after these steps, treat the area using the scratch removal method described above.
