
Composite Locking Rubber Flooring









































Details
The primary materials of the product are polyvinyl chloride (PVC) and calcium carbonate (natural stone powder). The production process is as follows: 1. Mixing: blend raw materials using a large-scale mixer; 2. Extrusion: feed the blended material through a continuous extrusion line to form a substrate of the required thickness; 3. Hot pressing: use a large steam hot press at 500 tons of pressure to fuse the decorative film, wear layer, and substrate together for 45 minutes; 4. Conditioning: allow the product to rest in ambient air for 24 hours; 5. Tempering: pass the product through a 100-meter-long cold and hot water bath to improve dimensional stability through thermal expansion and contraction; 6. Conditioning: rest again for 24 hours; 7. Profiling: cut to size and mill the click-lock profile; 8. Testing: pass laboratory quality inspections; 9. Lamination: attach the acoustic underlayment; 10. Packaging; 11. Warehousing. Available sizes include: 600×126 / 914×150 / 1220×180 / 1530×180 / 1800×228 mm.
Attention
1. Remove dust and dirt from the surface of the click-lock flooring. 2. Clear away maintenance wax, grease, dust, and other contaminants from the floor surface; use a wet vacuum to extract dirty water. 3. Rinse with clean water and extract. 4. If needed, apply 1–2 coats of high-strength floor finish wax.
