PE Wall Fabric

Reference Price:USD/m
Brand:JINGSHANG
Material No.:PR0NQX2Z
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:750-05
Color:
Gray Series
Content:PE
Width:1.37cm
Surface Treatment:Woven
Flammability:F
Lightfastness:5
Seamless Match:NO
Brand Name:JINGSHANG
Series Name:Wallpaper & Fabric Wallcovering
Category:Wallpaper/Non-woven Wallpaper
Customizable:Yes
Overview
Case Diagram
Case Diagram

Details

1. PE wallcovering has a smooth surface and soft hand feel. It is dimensionally stable, highly durable, and offers excellent electrical properties and high-frequency insulation unaffected by humidity.


2. PE wallcovering is an extremely low-VOC material with multiple functions: antibacterial, moisture-proof, stain-resistant, non-toxic, odorless, flame retardant, and sound-insulating.


3. The product is colorfast, insect-resistant, mildew-resistant, high-strength, resistant to oil, acid and various chemicals, cold-resistant, radiation-resistant, abrasion-resistant, pill-resistant, anti-static, anti-bending, highly breathable, water-repellent, and easy to clean.



Attention

Installation precautions:

① For relatively heavy woven wallcoverings like PE, a heavy-duty wallcovering adhesive is recommended. Apply a thin coat of thick adhesive. After coating large areas, use a small brush to add adhesive to inside and outside corners to avoid missed spots.

② After hanging, keep the wallcovering plumb and smooth with a brush. When going around an inside corner, first press with an inside corner roller, then press firmly with the corner of a metal smoother to avoid white marks or rounded corners. At outside corners, score the back of the wallcovering with the back of a knife before folding, creating a crisp corner that resists hollow spots.

③ For overlapping cuts on PE wallcovering, always place a metal pad beneath the cut to prevent cutting into and delaminating the substrate. After cutting, use a sponge seam roller to lightly press the seam. Do not use a hard roller to avoid compressing the PE surface, which can cause dark patches or seam shadows.

④ After installation, inspect with a bright light. If you find particles, gently tap them flat. If you find hollow spots at corners or bubbles on the surface, carefully heat the area with a heat gun to soften it, then brush flat.