
ABA Composite Click Lock Vinyl Flooring






















Details
The main materials of the product are polyvinyl chloride (PVC) and calcium carbonate (natural stone powder). The production process is as follows: 1. Mixing: raw materials are blended using large mixing machines; 2. Extrusion: the blended material is extruded into a substrate of the required thickness through assembly line equipment; 3. Steam Hot Pressing: a large steam hot press with 500 tons of pressure bonds the decorative film, wear layer, and substrate together under heat for 45 minutes; 4. Conditioning: the product rests for 24 hours to allow exposure to air; 5. Tempering: the product is immersed in hundred-meter-long cold and hot water tanks to improve dimensional stability through thermal expansion and contraction; 6. Conditioning: another 24-hour resting period to allow contact with air; 7. Grooving: cut to specified dimensions and click-lock grooves are machined; 8. Inspection: pass laboratory testing; 9. Attaching: apply acoustic underlayment; 10. Packaging; 11. Warehousing. Available sizes: 600*126 / 914*150 / 1220*180 / 1530*180 / 1800*228 mm.
Attention
1. Remove dust and debris from the surface of the click-lock flooring. 2. Clean off maintenance wax, grease, dust, and other dirt from the flooring surface, then use a wet vacuum to extract the dirty water. 3. Rinse with clean water and vacuum up. 4. If necessary, apply 1-2 coats of high-strength floor finish.
