
Composite Locking Rubber Flooring












Details
The product is primarily made from polyvinyl chloride (PVC) and calcium carbonate (natural stone powder). The production process is as follows: 1. Mixing – raw materials are blended in large industrial mixers; 2. Extrusion – the mixed compound is fed through a production line and pressed into a base layer of the required thickness; 3. Steam hot pressing – a large 500-ton steam press bonds the decorative film, wear layer, and base layer together under heat and pressure for 45 minutes; 4. Conditioning – the panel is left to rest for 24 hours to acclimate to ambient air; 5. Tempering – the product passes through hundred-meter-long cold and hot water baths to enhance dimensional stability through thermal expansion and contraction; 6. Conditioning – another 24-hour rest period to further acclimate; 7. Profiling – cutting to specified dimensions and milling the click-lock profile; 8. Testing – laboratory inspection for quality approval; 9. Attaching – applying the acoustic underlayment; 10. Packaging; 11. Warehousing. Available sizes: 600×126 / 914×150 / 1220×180 / 1530×180 / 1800×228 mm.
Attention
1. First, remove dust and debris from the surface of the click-lock flooring. 2. Clean off any protective wax, grease, dirt, and other contaminants, then extract the dirty water using a wet vacuum. 3. Rinse with clean water and extract again. 4. If necessary, apply 1–2 coats of high-strength floor finish.
