Rasato Texture Art Paint

Reference Price:USD/㎡
Brand:MP
Material No.:RG1QM05M
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:Warsaw Map
Country of Origin:Italy
Water Resistance:Not waterproof
Finish:Matte,Matte, gradient
Color:
Blue Series
Indoor/Outdoor:Indoor
Mold Resistance‌:Mold Resistant
Flammability:A2
Brand Name:MP
Series Name:Decorative Coatings
Category:Paint/Decorative Paint
Customizable:Yes
Overview
Case Diagram
Case DiagramMaterial ImageMaterial ImageMaterial ImageMaterial ImageMaterial Image

Details

/ 100% Made in Italy / Natural lime-based / Three distinctive textures: ultra‑fine, fine and coarse sand / High hardness, breathable, mould‑ and moisture‑resistant / Can create scraped, travertine, dragged, polished and other decorative finishes

RASATO is a mineral coating based on premium lime putty. The lime is slaked and matured for an extended period (to guarantee stability and durability), then blended with carefully selected marble powders of the right particle size, vegetable‑derived ingredients and less than 3% organic materials, along with inorganic earths and oxides (residues comply with DIN 18363, 2.4.6 standard). Using lime as the sole binder maximises the product's breathability, allowing ambient moisture to migrate through the render and the masonry. The high‑purity mineral composition actively inhibits the growth and spread of mould and bacteria. The carbonation (ageing) process builds a strong, stable structure that keeps walls looking fresh for years. RASATO boasts excellent lightfastness; it is non‑flammable, non‑toxic and environmentally friendly. Because of its special mineral character, slight unevenness in hue and colour variations may appear in exterior applications. These occur due to varied absorption rates of the substrate during application and as the surface weathers over time. If the product is exposed to prolonged heavy rain within days of application, especially acid rain, a whitish surface bloom may form, since the carbonation reaction of calcium hydroxide has not yet fully completed. This bloom will disappear with the next heavy rainfall. This is an inherent characteristic of the product and should not be regarded as a defect.

Attention

Before application, ensure the wall is completely dry, structurally sound, and the surface is firmly bonded without risk of detachment. The wall must be dry and clean, free from grease, microbial growth, mold, efflorescence, and any contaminants that could compromise adhesion or performance. When applying the product, make sure the wall temperature and ambient temperature are between 8°C and 35°C, and relative humidity does not exceed 75%. Wall temperature and ambient temperature must be above 5°C to allow the wall to dry properly. Apply the product consistently to achieve a uniform, aesthetically pleasing finish.