
1/1
Find
Abaca Wallpaper
Reference Price:USD/m
Brand:JINGSHANG
Material No.:RZNJDKC3
Supplier: CONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:740-01
Lightfastness:4
Flammability:F
Pattern Repeat:NO
Color:Yellow Series
Width:91.5cm
Finish:Woven
Content:Abak
Brand Name:JINGSHANG
Series Name:Wallpaper & Wall Fabric
Category:Wallpaper/Natural Matieral Wallpaper/Natural Woven Material
Customizable:Yes
Overview
Case Diagram


Details
Material Introduction: Abaca is a perennial herbaceous plant of the Musaceae (banana) family. Because it resembles a banana tree, it is also called Manila hemp. It is mainly cultivated on Luzon and Mindanao islands in the Philippines and was traditionally exported through the port of Manila, hence the name Manila hemp.
Characteristics: Wallcoverings made from abaca feature a delicate hand feel, refined texture, natural color tones, and a lightweight yet tough structure. Functionally, abaca provides inherent flame-retardant properties that many natural materials cannot achieve, unique sound-absorbing qualities, the ability to regulate indoor humidity, and high breathability – it is environmentally friendly while also protecting the wall surface. We use abaca imported from the Philippines; the woven material has fewer knots and a cleaner surface layer.
Attention
Installation Notes:
① Apply adhesive to the wall; a high-solids adhesive is recommended. Lightly dampen the back of the wallcovering with water.
② Use the double-cut (overlap and trim) method. Place a stainless steel shim under the wallcovering to protect the wall surface.
③ Use a short-bristle brush to carefully remove air bubbles, wrinkles, and excess adhesive. Do not wipe the surface. If adhesive seeps through the seam, it cannot be cleaned and will create a visible "glossy line" on the surface. Therefore, a machine applicator and protective tape are recommended to prevent adhesive from touching the wallcovering face.
④ If bulges appear after the abaca wallcovering is hung, use a wood veneer iron at 100°C to press them flat.
⑤ As natural fiber wallcoverings are handcrafted, slight seam visibility and natural color variations are inherent characteristics and should be considered normal.
