
Artificial Stone Vessel Sink


Details
Product dimensions: 400x400x110 mm.
The surface features a matte finish, with colors and pattern designs customizable according to design requirements.
We use high-quality resin and aluminum powder, combined with our independently developed and refined formula and meticulous production process.
The product demonstrates outstanding resistance to yellowing, cracking, and tensile stress, as well as superior stain resistance, load-bearing performance, and fire resistance, maintaining its quality for 5 to 10 years or longer.
Attention
In most cases, MUNK solid surface products can be repaired if accidentally damaged. However, please follow the instructions below to prevent any permanent damage:
1. Avoid contact with strong chemicals such as paint removers or aggressive cleaning agents. If contact occurs, immediately rinse the surface with clean water.
2. Do not carve or scratch directly on the solid surface product.
3. When filling with hot water, it is recommended to run cold water at the same time.
Treatment of light scratches:
First assess the severity of the scratch. Begin with the finest sandpaper. Sand along the scratch in a straight line, then change direction by 90° and continue sanding. This ensures all scratches have been removed.
Note:
If using the finest sandpaper takes too long, you may switch to a coarser grit.
To minimize dust during sanding, wet the surface before starting.
After use, rinse the sandpaper to remove residues. Dry it thoroughly and store it properly for future use.
Surface care:
1. Most dirt and stains: Use soapy water or an ammonia-based cleaner, rinse, and wipe dry.
2. Watermarks: Wipe with a damp cloth, then dry with a clean cloth.
If stains persist after the above methods, treat them following the scratch removal procedure.
