
Gray Agglomerate Stone

Attention
Maintenance & Care
Floors:
1. For daily cleaning and maintenance, use a pH-neutral cleaner. Do not use acidic or alkaline cleaners such as toilet bowl cleaner or stone mold removers. Do not apply common floor wax.
2. Place a two-stage dust control system at entrances: an aluminum dust mat outside and a dust-absorbing carpet inside; use additional moisture-absorbing mats during rainy or snowy weather.
3. Use a dry dust mop or vacuum cleaner for cleaning and dust removal. Avoid wetting the floor and never rinse the floor with water.
4. Promptly wipe up spills such as coffee, tea, or fruit juice. If stains cannot be removed with a neutral cleaner, honing and re-crystallization may be required.
5. Do not drag heavy items across the floor. When moving heavy loads, place protective layers on the surface to prevent scratching.
6. Engineered stone floors should receive regular re-crystallization treatment. For high-traffic areas like lobby entrances and corridors, perform 1–2 times per quarter; for general areas, 1–2 times per year.
Wall & Column Cladding:
1. Wipe with a dry cotton cloth; use a vacuum cleaner if necessary to remove surface dust.
2. Keep the wall clean and avoid contact with sharp objects or corrosive liquids.
3. If any panel in a dry-hung system becomes loose, or if fixing hardware shows signs of rust, loosening, or falling off, repair or replace promptly.
Countertops:
1. Avoid contact with sharp objects or corrosive liquids.
2. Avoid prolonged direct contact with high-temperature items.
3. Staining substances (paint, coffee, tea, fruit juice, etc.) should be wiped off immediately.
4. After use, dry off any visible water to keep the countertop clean and dry.
