
Freestanding Bathtub





Details
Engineered stone is a new type of mineral-filled polymer composite material, made from natural mineral powder (aluminum powder), high-performance resin, and natural pigments. It combines the natural texture and solid feel of marble, the smoothness of ceramic, and the workability of wood, offering a fine texture, warm touch, consistent material throughout, and elegant appearance.
Product Advantages:
1. Homogeneous material inside and out, seamless integration, long service life (10-year warranty);
2. Versatile design, excellent moldability, can be customized to specific requirements;
3. Water absorption rate as low as 0.034%, high gloss, soft touch, easy to clean and repair;
4. Good thermal insulation, flexural strength and impact resistance meet and exceed national testing standards;
5. Non-radioactive, recyclable, a typical environmentally friendly product.
Attention
I. Cleaning Guidelines:
When stains appear on the solid surface bathtub, dampen a scouring pad with water and gently scrub the surface in circular motions. Repeat as needed until the stain is removed.
II. Daily Care Instructions:
1. Avoid high temperatures: Do not pour boiling water directly into the bathtub. Always fill with cold water first before adding hot water. Solid surface material begins to soften at 100°C, so avoid storage or use in environments above 45°C.
2. Avoid scratches: Never use sharp or abrasive items to clean the basin surface.
3. Avoid heavy impacts that may cause cracking.
4. Keep away from strong organic solvents such as paint, volatile agents, and thinners, which may cause surface softening, dissolution, or cracking.
5. The solid surface material requires proper care. For light scratches, repair can be achieved with 400-grit or finer sandpaper.
6. To maintain cleanliness, after bathing wipe the surface dry with a soft, dry cloth. For yellowish marks or stubborn stains, dampen a scouring pad or 400-grit sandpaper with water and gently scrub the area to remove the dirt.
