ASA Plastic Outdoor Flooring

Reference Price:USD/㎡
Brand:BeyondWood
Material No.:TM7SDO5Z
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:AS140*21-AT
Usage:Commercial,Residential
Country of Origin:China
Size(mm):140*3000
Wood Species:ASA Plastic
Surface Treatment:Wear-Resistant Surface
Availability:Made to Order
Flammability:Not Tested Yet
Color:
Gray Series
Overall Thickness(mm):21
Pattern:Woodgrain Effect
Indoor & Outdoor:Outdoor
Brand Name:BeyondWood
Category:Flooring/Wood Flooring/Wood Plastic Composite Flooring
Customizable:Yes
Material Spelling
Overview
Structural Diagram
Structural DiagramMaterial ImageMaterial Image
Case Diagram
Case Diagram

Details

The surface material of this product is made of ASA engineering plastic, which has excellent outdoor weather resistance, anti-static and dustproof properties, and is more resistant to dirt. The floor core layer is foamed and extruded, so the weight of this product is lighter than that of PE co extruded plastic wood.

What is even more special about this product is that the core layer is embedded with carbon steel, which increases the physical structural performance of the product. Therefore, when paving, the span of the keel can be increased to 450mm without worrying about deformation. The thermal expansion and contraction coefficients of this product are relatively small, so there is no need to worry about expansion and arching in high temperature climates. Long term use can achieve good floor flatness.

Attention


No maintenance required.

This product can be laid directly on the ground without using a keel.

If it is necessary to elevate the finished surface, it is recommended to use hot-dip galvanized steel with specifications of 40 * 40 * 2mm, 50 * 50 * 2, etc., with a keel span not exceeding 450mm,

The keel needs to be supported and cannot be directly attached to the ground, leaving a drainage gap.

Floor splicing can be done without leaving gaps, and 3-5mm gaps should be reserved at both ends.