Round Freestanding Wood-Burning Fireplace

Reference Price:USD/unit
Brand:JollyMec
Material No.:TZLLHJC3
Supplier: CONTACT USCONTACT US
Material ID:
Add to Project
Material Consultation
Overview
Product Reports
Documents
Specifications
Product Model:Clipper up
Installation Service:Site survey and installation
Country of Origin:Italy
Warranty Period(Years):6
Customization Cycle:90-120 days
Heating Area(㎡):40-60
Weight(kg):115kg
Color:
Black Series
Flame Type:Wood Burning
Indoor/Outdoor:Indoor
Content:Steel plate
Brand Name:JollyMec
Series Name:Clipper Round Freestanding Wood-Burning Fireplace
Category:Fireplaces & Heaters/Real-fire Fireplace
Customizable:No
Overview
Product Details/cases/detailed Images
Product Details/cases/detailed Images
Structural Diagram
Structural DiagramMaterial ImageMaterial ImageMaterial ImageMaterial Image
Case Diagram
Case Diagram

Details

Attention

1. The stove can be installed with either a top flue outlet or a rear flue outlet. 2. Use firewood with a length of approx. 350 mm. 3. The stove relies on the natural pressure difference created by the chimney height to vent smoke outdoors; therefore, horizontal flue runs should not exceed 3 meters. Ensure the flue can be conveniently routed at the installation location. 4. If the stove is placed on a wooden floor, it is recommended to put a steel plate, stone slab, or glass sheet underneath to protect the floor from sparks that may escape when the door is opened. 5. Maintain a clearance of at least 10 cm between the rear of the stove and the wall. The back of the stove does not generate excessive heat, so conventional wall materials can be used. Within 50 cm on either side of the stove, no flammable materials are allowed. Within 1 meter in front of the stove, no flammable materials are allowed. 6. It is recommended to clean the ash from the firebox after every 2–3 uses. The stove is equipped with an ash pan at the bottom and a dedicated tool for easy removal. 9. If the firewood has a high moisture content, incomplete combustion may occur, leaving carbon particles on the glass. If the glass turns black, wait until the stove is cool and not in use, then wipe the glass with a damp cloth or paper towel dipped in a small amount of wood ash from the firebox. This cleans effectively. Avoid using chemical cleaners, as they may damage the stove’s glazed surface. 10. When the stove is lit, the glass front can reach 200–300°C. Avoid touching it. The stove comes with heat-resistant leather gloves; always wear them when operating the stove. 11. Use wax-based fire starters to ignite the stove. Do not use liquid alcohol or other materials to start the fire. 12. When the stove is in use, keep children especially supervised to prevent accidental contact and avoid the risk of burns.